| Product SKUs |
| MBD-X10SLL-F | X10SLL-F (Bulk Pack)
|
| Physical Stats |
| Form Factor | microATX |
| Dimensions | 9.6" x 9.6", (24.4cm x 24.4 cm) |
| Processor/Cache |
| CPU |
Intel® Xeon® processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors
Single Socket H3 (LGA 1150)
|
| System Memory |
| Memory Capacity | 4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) |
| Memory Type | 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.5 V,1.35V |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
|
| On-Board Devices |
| Chipset | Intel® C222 Express PCH |
| SATA |
SATA3 (6Gbps) w/ RAID 0, 1
SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 with 10/100/1000M bps MAC
|
| Network Controllers |
Intel® i217LM + Intel® i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI) |
| VGA | BMC integrated Aspeed AST2400 |
| Input / Output |
| SATA |
2x SATA3 (6Gbps) ports
4x SATA2 (3Gbps) ports |
| LAN |
2x Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port |
| USB |
2x USB 3.0 ports (1 Type-A, 1 via header)
6x USB 2.0 ports (4 rear, 2 via header)
|
| VGA | 1x VGA D-Sub Connector |
| Serial Ports | 2x COM ports (1 rear, 1 header) |
| DOM TPM | SATA DOM (Disk on Module) power connector support 1x TPM 1.2 20-pin Header |
| Chassis ( Optimized for X10SLL-F ) |
| | 1U Chassis:
SC813MTQ-441CB
SC813MTQ-350CB
SC813MTQ-R400CB
SC512F-441B
SC512F-350B
SC811TQ-441B
SC113MTQ-330CB
SC113MTQ-R400CB
2U Chassis:
SC823TQ-653LPB
SC825MTQ-R700LPB
SC213LT-600LPB
3U Chassis:
SC833T-653B
Mid/Mini Tower Chassis:
SC731i-300B
SC733TQ-500B
SC733TQ-665B
SC732D4-500B
SC732D4-865B
SC732D4-903B
SC732D2-500B
SC732D2-865B
SC732D2-903B
SC732i-865B
SC732I-500B
4U / Tower Chassis:
SC842TQ-865B
SC842TQ-665B
SC842i-500B
SC743TQ-865B-SQ
SC745TQ-R920B
SC745TQ-920B
|
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. |
| SuperServer(s) with X10SLL-F |
| Model(s) |
SYS-5038D-I
SYS-5018D-MF
|
| Expansion Slots |
| PCI-Express |
1x PCI-E 3.0 x8 (in x16) slot
1x PCI-E 3.0 x8 slot
1x PCI-E 2.0 x4 (in x8) slot
|
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI (SMBIOS) 2.7
ACPI 5.0
USB Keyboard support |
| Management |
| Software |
IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
|
| Power Configurations |
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
|
| PC Health Monitoring |
| Voltage |
Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
Total of five 4-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
|
| LED |
CPU / System Overheat LED
+5V Standby alert LED
|
| Other Features |
Chassis intrusion detection
Chassis intrusion header
|
| Operating Environment |
| Operating Temperature Range |
0°C ~ 50°C (32°F ~ 122°F) |
| Non-Operating Temperature Range |
-40°C ~ 70°C (-40°F ~ 158°F) |
| Operating Relative Humidity Range |
8% ~ 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
5% ~ 95% (non-condensing) |
