|
|
Supermicro X9DAX-ITF C602, XEON E5-2600, LGA2011, DDR3, 2x 10GBase-T, SATA 3G, IPMI, USB 3.0 Motherboard: MBD-X9DAX-ITF-O
|
|
Images shown for reference only
|
|
|
Supermicro X9DAX-ITF C602, XEON E5-2600, LGA2011, DDR3, 2x 10GBase-T, SATA 3G, IPMI, USB 3.0 Motherboard: MBD-X9DAX-ITF-O X9DAX-ITF C602, XEON E5-2600, LGA2011, DDR3, 2x 10GBase-T, SATA 3G, IPMI, USB 3.0 Motherboard: MBD-X9DAX-ITF-O
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: MB20_SUPE_X9_57
|
|
Price: $652.30
|
|
|
|
|
 | Product SKUs | | Brand | Supermicro | | MBD-X9DAX-ITF-O | X9DAX-ITF | | Package | Standard Retail Pack | | Physical Stats | | Form Factor | E.E. ATX 13.68" x 13" (34.74cm x 33cm) | | Processor/Cache | | CPU Type | Intel® Xeon® processor E5-2600 (up to 150W TDP **)
Dual Socket R (LGA 2011) | | Cache | Up to 20MB | | System Bus | QPI up to 8 GT/s
** Motherboard supports this maximum TDP. Please verify your system can thermally support | | System Memory | | Memory Capacity | 16x 240-pin DDR3 DIMM sockets
Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM) | | Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs | | DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB | | Memory Voltage | 1.5 V, 1.35 V | | Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) | | On-Board Devices | | Chipset | Intel C602 chipset | | AHCI SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10 | | SCU SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10 | | SAS | - | | Network Controllers | Intel® X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) | | IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC | | Audio | RealTek ALC889 7.1 High Definition Audio with S/PDIF header | | Input / Output | | SATA | 2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps) | | SCU SATA | 4x SATA 2.0 ports (3Gbps) | | SAS | - | | LAN | 2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port | | USB | 4 USB 3.0 ports (2 rear + 2 via header)
7 USB 2.0 ports total
(4 rear + 2 via header + 1 Type A) | | Audio | Line-in / Line-out / Microphone Ports | | Serial Port / Header | 1 Fast UART 16550 Header | | IEEE 1394a | 2 Headers | | DOM/ TPM | 1 DOM (Disk on Module) power connector 1 TPM 1.2 20-pin Header | | Expansion Slots | | PCI-Express | 2x PCI-E 3.0 x16
3x PCI-E 3.0 x8
1x UIO PCI-E 3.0 x8 (for SMC UIO HBA) or 1x PCI-E 2.0 x4 (in x8)
(Both CPUs need to be installed for full access to PCI-E slots. See manual for details.) | | PCI | - | | System BIOS | | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | | BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI | | | 
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 512GB DDR3 1600MHz ECC
Registered DIMM; 16x DIMM sockets
4. 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8,
1 UIO PCI-E 3.0 x8 (for SMC UIO HBA)
or 1 PCI-E 2.0 x4 (in x8)
5. Intel® X540 Dual port 10GBase-T
6. 8x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with
Dedicated LAN
8. Dual port front and rear USB 3.0
9. Performance boost with Hyper-Speed |
|
