|
|
Supermicro X9QR7-TF+-B Quad Intel Xeon E5-4600/4600 v2 Socket R (LGA2011) C602 Proprietary Motherboard, DDR3, 2x 10Gb LAN, IPMI, SATA, Broadcom 2208 8-Port SAS2, RAID, PCIe, VGA, USB, Bulk: MBD-X9QR7-TF+-B
|
|
Images shown for reference only
|
|
|
|
|
|
|
| Shipping Extra
|
|
ATACOM Part #:MB2M_SUPE_X9_66
Manufacturer Part #:X9QR7-TF+-B |
|
Price: $1167.10
|
|
|
|
|
|
|
 |
|
 |
| MBD-X9QR7-TF+
-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 16.4" x 16.79" (41.66cm x 42.65cm)
|
| |
|
| CPU |
-
Intel® Xeon® processor E5-4600 v2
(12-Core)** or E5-4600 (8-Core)
family
- Quad Socket R (LGA 2011)
** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.
|
| Cache |
|
| System Bus |
|
| |
|
| Memory Capacity |
- 32x 240-pin DDR3 DIMM slots
- Supports up to 1TB DDR3 ECC Registered memory (RDIMM) in 32 DIMM slots
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
|
| SAS |
- SAS2 from Broadcom 2208 (1GB cache)
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
- Supports up to 16 devices as default, more HDD devices support is also available as an option *
* For special sku, please contact your Supermicro Sales.
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
| |
|
| SATA |
- 2x SATA 3.0 ports (6Gb/s)
- 4x SATA 2.0 ports (3Gb/s)
|
| SAS |
|
| LAN |
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 8x USB 2.0 ports total
(4 rear + 3 front + 1 Type A)
|
| Video |
|
| Serial Port / Header |
- 2x Fast UART 16550 ports: 1 rear and 1 header
|
| DOM |
- 1 DOM (Disk on Module) power connector
|
|
|
|
| 1U Chassis |
- CSE-818A-1K43LPB
- (rev. M required, Air Shroud MCP-310-81809-0B)
|
| 2U Chassis |
- CSE-828TQ-R1K43LPB
- (rev. M required, Air Shroud MCP-310-82805-0B)
|
| Tower / 4U Rackmount |
|
|
Important Chassis Notes
|
- To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
|
|
|
|
|
| Model(s) |
-
SYS-8047R-7RFT+
-
SYS-8017R-7FT+
|
| |
|
|
| PCI-Express |
- 2x PCI-E 3.0 x16 slots
- 2x PCI-E 3.0 x8 slots
|
| |
|
| BIOS Type |
- 16MB SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
- Optional IPMI 1.5 / 2.0
|
| Power Configurations |
- ACPI / APM Power Management
- Main Switch Override Mechanism
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5 Phase-switching voltage regulator
|
| FAN |
- 10x 4-pin fan headers
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
|
|
|
|
