| Product SKUs |
| MBD-X7DGU-B |
•X7DGU
(Bulk Pack) |
| Physical Stats |
| Form Factor |
Proprietary
|
| Dimensions |
12" x 13" (30.5cm x 33.2cm)
|
| Processor/Cache |
| CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s)
of the same type below:
- Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz
- Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up
to 3.73 GHz
|
| System Bus |
• 1333 MHz, 1066 & 667 MHz system bus
|
| System Memory |
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM
memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type |
667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2
SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
256MB, 512 MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
• 1.8
V only / 1.5 V(AMB) |
| On-Board Devices |
| Chipset |
Intel® 5000X (Greencreek) chipset
ESB2
|
| SATA |
Intel SB SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
|
| IPMI |
Support for Intelligent Platform Management Interface
v.2.0
200-pin IPMI slot (SIMSO)
|
| Network
Controllers |
Intel® (ESB2/Gilgal)
82563EB Dual-port Gigabit Ethernet Controller |
| Graphics |
ATI ES1000
controller with 16 MB of video memory |
| Clock Generator |
IDT CV152 |
| Input / Output |
| Serial ATA |
Six Serial
ATA ports |
| IDE |
Single EIDE channel supports up to two UDMA IDE devices
(IDE-M, IDE-S)
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
• 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
• 2x RJ45 LAN ports |
| USB |
2x USB rear ports
3x USB internal headers
Total 5 USB 2.0 Compliant / 1.1 Compliant
|
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports |
| Serial
Port / Header |
• 1 Fast UART 16550 serial ports
• 1 Fast UART 16550 serial header
|
| VGA |
1x VGA
Port |
| Chassis ( Optimized for
X7DGU ) |
| 1U Chassis |
CSE-815TQ-R650U
CSE-815S-560U
CSE-812L-520U
|
| 2U Chassis |
- CSE-825TQ-560U
- CSE-825TQ-R700U
|
`
| Important Chassis
Notes |
To ensure system stability, a 550W (minimum) ATX
power supply
[4-pin (+12V), 8-pin (+12V) and 20-pin are required]
|
| Expansion Slots |
| PCI-Express
/ PCI-X / UIO |
Left Side
1 (x16) PCI-Express slot
Right Side
1 64-bit 133MHz PCI-X or
1 (x8) PCI-Express
|
| System BIOS |
| BIOS Type |
• 8Mb Flash EEPROM with Phoenix® BIOS |
| BIOS Features |
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
|
| Management |
| Software |
Optional IPMI (Intelligent Platform Management Interface)
1.5 / 2.0
Super Doctor
III
Watch Dog
NMI |
| Power Configurations |
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
|
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V,
+3.3V Standby, +5V Standby, VBAT, HT, Memory Voltage,
Chipset Voltage
5-Phase-switching voltage regulator with auto-sense
from 0.8375V-1.60V
|
| FAN |
Total of four 3-pin and four 4-pin fan headers supporting
up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin speed control
Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I 2 C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
|
| LED |
CPU / System Overheat LED
UID / Remote UID LED ( IPMI Only )
|
| Other Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support
|
RoHS
|
• RoHS
Compliant 5/6 |
