| Part Number |
| MBD-X7DCA-i-O |
X7DCA-i(Standard Retail Pack) |
| Physical Stats |
| Form Factor |
Extended ATX |
| Dimensions |
13.05" x 12.075 " (33.15cm x 30.67cm) |
| Processor/Cache |
| CPU |
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| System
Bus |
1333 / 1066 MHz system bus |
| System Memory |
| Memory
Capacity |
Six 240-pin DIMM sockets
Supports up to 48GB 667/533MHz DDR2 ECC Register memory
Memory must be populated in pairs |
| Memory
Type |
667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
512MB, 1GB, 2GB, 4GB, 8GB** |
| Memory
Voltage |
1.8V only |
| Error
Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| Input / Output |
| Serial ATA |
Six Serial ATA ports
Six SATA hard drives supported |
| IDE |
Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy |
1 Floppy controller; 1.44 MB |
| LAN |
2x RJ45 LAN ports |
| USB |
4x USB rear ports
6x USB internal header
10 total USB ports, 2.0 Compliant |
| Audio |
High Definition 7.1 Channel Audio
Line-in / Line-out / Microphone Ports |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Port / Header |
1 Fast UART 16550 serial port
1 Header |
| On-Board Devices |
| Chipset |
Intel® 5100 (San Clemente) chipset
Intel® ICH9R + PXH-V
|
| SATA |
Intel ICH9R SB SATAII Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
|
| IPMI |
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMLP)
|
| Network Controllers |
Intel® Dual 82573V/L Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Audio |
High Definition 7.1 Channel Audio |
| Super I/O |
Winbond 83627DHG chip |
| Chassis ( Optimized for
X7DCA-i ) |
| Tower / 4U Rackmount |
CSE-743TQ-865
CSE-743TQ-865-SQ (OEM Only)
CSE-743T-645 |
| Important Chassis Notes |
To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| Expansion Slots |
| PCI-Express |
1 (x16) PCI-e slot
1 (x4) PCI-e (using x16) slot
|
| PCI-X |
2x 64-bit 133/100MHz PCI-X (3.3V) slots |
| PCI |
2x 32-bit 33MHz PCI (5V) slots |
| System BIOS |
| BIOS
Type |
8Mb
Flash EEPROM with Phoenix® BIOS |
| BIOS
Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support
Hardware BIOS Virus protection
|
| Management |
| Software |
Optional IPMI (Intelligent Platform
Management Interface) 2.0
Super Doctor
III
Watch Dog
NMI |
| Power
Configurations |
ACPI / ACPM Power Management
Main Switch Override Mechansim
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep mode
Power-on mode for AC power recovery
Internal/External modem remote ring-on
Suspend to RAM (STR)
|
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +5V Standby, VBAT, Chipset Voltages.
4 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN |
Eight 4-pin fans
8x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Support for 3-pins
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI |
| LED |
CPU / System Overheat LED
Suspend-state Indicator LED
+5V Standby alert LED
|
| Other
Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support |
| RoHS |
RoHS
Compliant 6/6, Pb Free
|
