Part Number (The Specification
is for X7DA3, not the + version) |
MBD-X7DA3+-O |
X7DA3+-O |
Physical Stats |
Form Factor |
|
Dimensions |
12.075" x 13.05" (30.7cm x 33.2cm)
|
Processor/Cache |
CPU |
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit
Xeon® processor(s) of the same type
below:
- Quad-Core Intel®
Xeon®Processor 5300 sequence (Clovertown processor) up to 2.66 GHz
- Dual-Core Intel®
Xeon®Processor 5100/5000 sequence (Woodcrest/Dempsey processor) up
to 3.73 GHz
|
System
Bus |
1333 MHz, 1066 & 667 MHz system bus |
System Memory |
Memory
Capacity |
Eight 240-pin DIMM sockets
Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM
memory
Dual branch memory bus
Memory must be populated in pairs
Memory Mirroring supported
|
Memory
Type |
667 /
533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit,
240-pin gold-plated DIMMs |
DIMM Sizes |
512 MB,
1GB, 2GB, 4GB |
Memory
Voltage |
1.8 V only 1.5V(AMB) |
Error
Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data
Correction (SDDC)
|
On-Board Devices |
Chipset |
Intel® 5000X (GreenCreek) chipset
MCH + PXH-V + ESB2
|
SAS |
Adaptec AIC-9410W Serial-Attached SCSI (SAS)
Controller
SAS Dual-Channel (internal)
Each SAS channel supports up to 4 SAS / SATA
drives for a total of up to 8 SAS or SATA hard
drives
Host RAID 0, 1, & 10 support
|
SATA |
Intel ESB2 SATAII Controller
RAID 0, 1, 5, 10 support
|
RAID |
Support for Zero-Channel RAID with Supermicro
All-In-One-ZCR Card : AOC-LPZCR2 or AOC-LPZCR3
RAID 0, 1, 5, 10
Optional: (Card NOT included)
|
IPMI |
Support for Intelligent Platform Management
Interface v.2.0
200-pin IPMI slot (SIMLP)
(Optional:
AOC-SIMLP-B )
( Optional:
AOC-SIMLP-3 ) with 3rd LAN support
NOTE: KVM-over-LAN not supported - there
is no DVO signal to the IPMI slot
|
Network
Controllers |
Intel® 82563EB Dual-Port Gigabit Ethernet
Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
Intel® I/OAT support for fast, scaleable,
and reliable networking
|
Super
I/O |
Winbond 83627HG chip
|
Input / Output |
Serial
ATA |
Six Serial ATA ports
Six SATA hard drives supported
|
IDE |
Single EIDE channel supports up to two UDMA
IDE devices(IDE-M, IDE-S) including CF card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Compact Flash (40-pin connector, IDE 1, single
channel) slot
|
Floppy |
• 1 Floppy controller; 1.44 MB, 2.88 MB |
LAN |
• 2x
RJ45 LAN ports |
USB |
4x USB rear ports
2x USB internal header
6 total USB ports, 2.0 Compliant / 1.1
Compliant
|
Audio |
AC97 Audio |
Keyboard
/ Mouse |
• PS/2
keyboard and mouse ports |
Serial
Ports |
• 1
Fast UART 16550 serial ports
• 1 Fast UART 16550 serial header |
Parallel
Port |
1 ECP / EEP parallel port |
Chassis ( Optimized for
X7DA3
) |
2U Chassis |
CSE-825TQ-R700LPV
CSE-825TQ-560LPV
CSE-823T-550LP
|
3U Chassis |
CSE-836E1-R800
CSE-836E2-R800
CSE-833T-550
CSE-833T-R760
CSE-933E1-R760
CSE-933E2-R760
CSE-933T-R760
CSE-933TQ-R760 |
Tower/
4U Rackmount |
CSE-743T-645 |
`
Important
Chassis Notes |
To
ensure system stability, a 500W (minimum) ATX power
supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
Expansion Slots |
PCI-Express |
1 (x16) PCI-e slot
1 (x4) PCI-e (using x16) slot
|
PCI-
X |
2x 64-bit 133/100MHz PCI-X (3.3V)
slots
1x 64-bit 100MHz PCI-X (3.3V) slot
|
PCI |
1x 32-bit 33MHz PCI (5V) slot
|
System BIOS |
BIOS
Type |
8Mb
Flash EEPROM with Phoenix® BIOS |
BIOS
Features |
Plug and Play (PnP)
SMBIOS 2.3
DMI 2.3
PCI 2.2
ACPI 1.0
PCI-X 1.0
USB Keyboard support
Hardware BIOS Virus protection
|
Management |
Software |
Optional IPMI (Intelligent Platform Management
Interface) v2.0
Super Doctor
III
Watch Dog
NMI
|
Power
Configurations |
ACPI Power Management
Main Switch Override Mechansim
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
CPU Fan Auto-off in Sleep Mode
Power-on mode for AC power recovery
Internal/External modem remote ring-on
Suspend to RAM (STR)
|
PC Health Monitoring |
CPU |
Monitors for CPU Cores, +1.8V,
+3.3V, +5V, -12V & +5V
Standby, VBAT
CPU Core 5-Phase-switching
voltage regulator with auto-sense
from 0.8375V-1.60V
|
FAN |
Total of eight 4-pin fans
8x fans with status monitoring
Status monitor for speed
control
Status monitor for on/off
control
Support for 3-pins (w/o speed
control)
Low noise fan speed control
Pulse Width Modulated (PWM)
fan connectors
|
Temperature |
Monitoring for CPU and chassis,
environment
CPU thermal trip support
Thermal Control for 8x Fan
Connectors
PSU I 2 C temperature sensing
logic
Thermal Monitor 2 (TM2) support
PECI
|
LED |
CPU / System Overheat LED
Suspend-state Indicator LED
+5V Standby Alert LED
|
Other
Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support
|