| Part Number |
| MBD-X7DWA-N-O |
X7DWA-N-O (Retail Pack) |
| Physical Stats |
| Form Factor |
Extended ATX |
| Dimensions |
13" x 12" (33.0cm x 31.0cm) |
| Processor/Cache |
| CPU |
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processo
|
| System
Bus |
1600 / 1333 / 1066 MHz system bus |
| System Memory |
| Memory
Capacity |
Eight 240-pin DIMM sockets
Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported |
| Memory
Type |
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
512 MB, 1GB, 2GB, 4GB, 8GB** |
| Memory
Voltage |
1.8 V or 1.5 V |
| On-Board Devices |
| Chipset |
Intel® 5400 (Seaburg) chipset
ESB2 |
| Serial ATA |
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux) |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0, v.1.5
200-pin IPMI slot (SIMSO(+)) |
| Network
Controllers |
Intel® 82575EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Audio |
ALC 883 High Definition 7.1 Channel Audio |
| Super
I/O |
Winbond 83627HG chip |
| Input / Output |
| Serial
ATA |
Six Serial ATA ports
Six SATA hard drives supported
|
| IDE |
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
Compact Flash (40-pin connector, IDE 1, single channel) slot
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
1 Floppy controller; 1.44 MB
|
| LAN |
2x RJ45 LAN ports
|
| USB |
4x USB rear ports
1x USB internal header
Total 5 USB 2.0 Compliant / 1.1 Compliant
|
| Audio |
High Definition 7.1 Channel Audio
Line-in / Line-out / Microphone Ports
|
| Serial
Ports |
1 Fast UART 16550 serial port
1 Serial header
|
| Firewire |
2x IEEE 1394 headers |
| Chassis ( Optimized for X7DWT-INF+ ) |
| 1U |
CSE-743TQ-865
CSE-743T-645
|
| 1U |
To ensure system stability, a 550W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| Expansion Slots |
| PCI-Express |
2 (x16) PCI-e (Gen 2.0) slots |
| PCI-X |
2x 64-bit 133MHz PCI-X (3.3V) slots |
| PCI |
2x 32-bit PCI (3.3V) slots |
| UIO |
1x UIO Slot |
| System BIOS |
| BIOS
Type |
8Mb Flash EEPROM with Phoenix BIOS® |
| BIOS
Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support |
| Management |
| Software |
Super Doctor III
Watch Dog
NMI
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0 |
| Power
Configurations |
ACPI Power Management
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep model
Power-on mode for AC power recovery
Suspend to RAM ( STR )
|
| PC Health Monitoring |
| CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
Total of eight 4-pin fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Support 3-pin fans (w/ speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PC temperature sensing logic
PECI
Thermal Monitor 2 (TM2) support
|
| LED |
CPU / System Overheat LED
Suspend-state indicator LED
|
| Other
Features |
Chassis intrusion detection
Chassis intrusion header
SDDC Support |
