Model |
Brand | Supermicro |
MBD-C2SEE-O |
C2SEE (Standard Retail Pack) |
MBD-C2SEE -B | C2SEE (Bulk Pack) |
Processor/Cache |
CPU |
Single LGA775 Socket
Supports Intel® Core™2 Extreme QX9000/QX6000 series
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
Supports Intel® Pentium® E5000/E2000 series
Supports Intel® Celeron® E1000 and 400 series |
system Bus |
1333 / 1066 / 800 MHz system bus |
System Memory |
Memory Capacity | Two 240-pin DIMM sockets
Supports up to 4 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel) |
Memory Type | DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
Memory Voltage | 1.5 V - 1.9V only |
On-Board Devices |
Chipset | Intel G43
ICH10 |
SATA | Intel® ICH10 SATA2 (3 Gbps) controller built-in |
Audio |
Realtek ALC888 HD 7.1 Channel Audio |
Network Controllers | 1 x Realtek RTL8111C Gigabit Ethernet
Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output |
Clock Generator |
CK505 |
Super I/O |
Winbond 83627DHG-P chip |
Video | Intel GMA X4500 |
Input / Output |
Serial ATA | Six Serial ATA ports (3Gbps)
Six SATA hard drives supported |
Floppy |
1 Floppy controller; 1.44 MB |
LAN | 1x RJ45 LAN port |
USB | 12x USB 2.0 / 1.1 compatible
6 rear + 2 on-board + 4 headers |
Audio |
S/PDIF out
Line-in / Line-out / Microphone Ports |
VGA |
On board VGA |
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
Serial Port | 1x Serial Header |
System BIOS |
BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3 |
Chassis |
Mid Tower |
CSE-733E-465B
CSE-733T-465B |
Important Chassis Notes |
To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. |
Dimensions |
Form Factor |
ATX |
Dimention | 12.0" x 9.6 ", (30.5cm x 24.4cm) |
Management |
Software | SuperDoctor® III
Watch Dog
NMI
Hardware monitor in W83627DHF (PECI support) |
Power Configuration | ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power recovery
Internal / External modem remote ring-on
Suspend to RAM (STR) |
Expansion Slots |
PCI |
4x 32-bit 33MHz PCI (5V) slots |
PCI-Express | 1 (x16) PCI-e 2.0 slot
1 (x4) PCI-e (using x16 slot)
1 (x1) PCI-e slot |
Operating Environment |
Operating Temperature Range |
10°to 35°C (50°to 95°F) |
Non-Operating Temperature Range |
-40°to 70°C (-40°to 158°F) |
Operating Relative Humidity Range |
8% to 90% (non-condensing) |
Non-Operating Relative Humidity Range |
5 to 95% (non-condensing) |
PC Health Monitoring |
Voltage |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
Adjustable CPU clock frequency ratio (Only available if CPU is supported) |
Fan |
Total of five 4-pin fan headers
3 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (without speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn. |
Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) Support
PECI |
LED |
CPU / System Overheat LED
Standby power alert LED |
Other Features |
Chassis intrusion Detection
Chassis intrusion Header |