Form Factor ATX

	Processor/Chipset CPU: - Single AMD EPYC 7000-series Processor - Socket SP3 Chipset: System on Chip

	System Memory Memory Capacity: - 8 DIMM slots - Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs - 8-channel memory bus Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB Memory Voltage: 1.2V Error Detection: - Corrects single-bit errors - Detects double-bit errors (using ECC memory)

	On-Board Devices SATA: SATA3 (6 Gbps) IPMI: - Support for Intelligent Platform Management Interface v.2.0 - IPMI 2.0 with virtual media over LAN and KVM-over-LAN support - ASPEED AST2500 BMC Network Controllers: - 2 1GbE LAN via Intel I210 - 1 Realtek RTL8211E PHY (dedicated IPMI) VGA: ASPEED AST2500 BMC

	Input / Output SATA: 16 SATA3 (6 Gbps) ports LAN: - 2 RJ45 Gigabit Ethernet LAN ports - 1 RJ45 Dedicated IPMI LAN port USB: - 5 USB 3.0 ports (2 rear, + 2 via header + 1 Type A) - 4 USB 2.0 ports (2 rear + 2 via header) VGA: 1 VGA port Others: - 1 COM port (rear) - 2 SATA DOM power connector - 1 TPM 1.2 header

	Expansion Slots PCI-Express: - 3 PCI-E 3.0 x8 - 3 PCI-E 3.0 x16 M.2: - Interface: PCI-E 3.0 x4 - Form factor: 2260, 2280, 22110 - Support SATA devices

	System BIOS BIOS Type: AMI 128Mb SPI Flash EEPROM BIOS Features: - Plug and Play (PnP) - DMI 2.3 - PCI 2.2 - ACPI 5.1 - USB Keyboard Support - SMBIOS 3.1.1

	Management Software: - Super Doctor 5 - Watch Dog - NMI - SUM - IPMI 2.0, KVM with dedicated LAN Power Configurations: - ACPI Power Management - Power-on mode control for AC power loss recovery

PC Health Monitoring CPU: - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby - CPU switching voltage regulator - Supports system management utility - VBAT FAN: - Up to 7-fan status tachometer monitoring - Up to 7 4-pin fan headers - Dual Cooling Zone - Status monitor for speed control - Pulse Width Modulated (PWM) fan connectors Temperature: - Monitoring for CPU and chassis environment - CPU Thermal Trip Support - Thermal control for 7x Fan connectors - I2C Temperature Sensing Logic LED: CPU / System Overheat LED Other Features: - Chassis Intrusion Detection - Chassis Intrusion Header - UID

	Environmental Specifications - Operating Temperature: 10oC to 35oC (50oF to 95oF) - Non-operating Temperature: -40oC to 70oC (-40oF to 158oF) - Operating Relative Humidity: 8% to 90% (non-condensing) - Non-operating Relative Humidity: 5% to 95% (non-condensing)

	Item Dimension ( L inch x W inch x H inch) 12 x 10 x 1

	Weight 3.00 lb

	Warranty Information 1 Year