|
Supermicro MBD-H11SSW-IN-O Proprietary Motherboard, Single AMD EPYC 7000-Series Socket SP3 Processors, 16X DDR4, SATA3, NVMe, 2X 1GBLan, USB, PCIE, IPMI, M.2, Video
|
|
Images shown for reference only
|
|
|
|
|
|
Shipping Extra
|
|
ATACOM Part #:MBS3_SUPE_S7_13
Manufacturer Part #:MBD-H11SSW-IN-O |
|
Price: $759.95
|
|
|
|
|
|
|
MBD-H11SSW-iN |
|
MBD-H11SSW-iN-B |
|
|
|
Form Factor |
|
Dimensions |
- 13.4" x 12.29" (34cm x 31.2cm)
|
|
|
CPU |
- Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required)
- Socket SP3
|
Cores |
- Up to 32 Cores
- Up to 64 Cores (Board revision 2.x required)
|
Chipset |
|
|
|
Memory Capacity |
- 16 DIMM slots
- Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
- Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required)
- 8-channel memory bus
|
Memory Type |
- DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
- DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required)
|
DIMM Sizes |
- 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required)
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
SATA |
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2500 BMC
|
Network Controllers |
- 2x 1GbE LAN Ports via Broadcom BCM5720L
- 1 Realtek RTL8211E PHY (dedicated IPMI)
|
VGA |
|
|
|
SATA |
|
SATA/NVMe Hybrid |
|
NVMe |
|
LAN |
- 2 RJ45 1GbE Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 7 USB 3.0 ports
(4 rear + 2 front + 1 Type A)
|
VGA |
|
Others |
- 2 COM ports (rear)
- 2 SATA DOM power connectors
- 1 TPM 2.0 header
- 1 TPM 1.2 header
|
|
|
PCI-Express |
- 1 PCI-E 3.0 x32 Left Riser Slot
- 1 PCI-E 3.0 x16 Right Riser Slot
|
|
M.2 |
- Interface: 2 PCI-E 3.0 x2
- Form factor: 2280, 22110
- Key: M-key
|
|
|
2U |
|
|
|
BIOS Type |
- AMI 128Mb SPI Flash EEPROM
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 5.1
- USB Keyboard Support
- SMBIOS 3.1.1
|
|
|
Software |
|
Power Configurations |
- ACPI Power Management
- Power-on mode control for AC power loss recovery
|
|
|
CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby
- CPU switching voltage regulator
- Supports system management utility
- VBAT
|
FAN |
- Up to 6-fan status tachometer monitoring
- Up to 6 4-pin fan headers
- Dual Cooling Zone
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 6x Fan connectors
- I²C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- UID
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|