|
FSP Power Supply FSP700-80WEPB 700W ATX 4CM FAN APFC 80PLUS PLATINUM BULK
|
|
Images shown for reference only
|
|
|
|
|
|
Shipping Extra
|
|
ATACOM Part #:POWS_FSPX_21_05
Manufacturer Part #:FSP700-80WEPB |
|
Price: $263.95
|
|
|
|
|
|
Product Highlight Efficiency Level: 80 Plus Platinum Altitude: 5000M PMBus: V1.2
|
|
General Specification Effciency: 92% 230VAC Voltage Regulation: +3.3V, +12V, +5V, +5SB: +/-5% 12V: +/-10%
|
|
Input Electrical Specification Input Frequency: 47 to 63 Hz Input Current: - 115V at 12.0 Amps-rms maximum - 230V at 6.0 Amps-rms maximum
|
|
Output Specification Hold-up time: - 115V/60Hz 16mSec. Minimum at 100% Load, - 230V/50Hz 16mSec. Minimum at 100% Load Ouput Voltage Regulation: - +3.3Vdc output : +3.5 Vdc minimum, + 4.5Vdc maximum - +5Vdc output : +5.5 Vdc minimum, + 6.82Vdc maximum - +12Vdc output : +13.4 Vdc minimum, + 15.6Vdc maximum Ripple and Noise: 115V-rms/230V-rms 5V 20ms Maximum Over current protection:- 3.3V:50mV p-p - 5V:50mV p-p - 12V1:120mV p-p - 12V2:120mV p-p - 12V3:120mV p-p - 12V4:120mV p-p / 12V:120mV p-p - 5Vsb:50mV p-p
|
|
Environmental Requirement Temperature Range: - Operating : 0 to +50oC - Storage :-20 to +80oC Humidity: - Operating: 85% to % RH, Non-condensing - Storage : 95% to % RH, Non-condensing MBTF: The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25oC, maximum-output load, and nominal AC inout voltage
|
|
Safety CE,FCC,TUV,UL/cUL,CCC
|
|
Output Voltage and Current Rating(+3.3V/ +5V/ +12V1/ +12V2/ +12V3/ +12V4/ -12V/ +5Vsb) Ripple-Noise(R-P) mV: 50mV / 50mV / 120mV / 120mV / 120mV / 120mV / 120mV / 50mV Regulation Load %: +/-5% / +/-5% / +/-5% / +/-5% / +/-5% / +/-5% / +/-10% / +/-5% Output Max.(A): 25A / 30A / 16A / 16A / 16A / 16A / 0.5A / 4A Output Min.(A): 0.1A / 1A / 1A / 1A / 1A / 1A / 0A / 0A
|
|
Notes - The +3.3V and +5V total output shall not exceed 150 watts. - The total output shall not exceed 600 watts - Maximum combined current for the 12V outputs shall be 48A - Ripple and noise measurements shall be made under all specified load conditions through a singple pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.
|
|
Item Dimension (L inchxW inchxH inch) 11 x 4 x 3
Weight 5.60 lb
Warranty Information 3 Years
|
|
|
|