Nominal Output Voltage(s) Supported 120V

	Frequency Compatibility 60 Hz

	Output Receptacles Hardwire

	Output (Watts) 3000

	Continuous Output Capacity (Watts) 3000

	Peak Output Capacity (Watts) 6000

	Output Voltage Regulation LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 VAC (+/-5%).

	Output Frequency Regulation 60 Hz (+/- 0.3 Hz)

	Overload Protection Includes 30A input breaker dedicated to the charging system and 2 branch rated 20A output load breakers

	Nominal Input Voltage(s) Supported 120V AC

	Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 290A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation).

	Maximum Input Amps / Watts DC INPUT: Full continuous load - 282A at 12VDC. AC INPUT: 40 amps total (20A line 1 / 20A line 2) at 120VAC with full inverter and charger load (25A max charger-only from line 1 / combined input load to support charger and AC output is automatically controlled

	Input Connection Type DC INPUT: Set of 4 DC bolt-down terminals (2 red / 2 black). AC INPUT: hardwire (2 input circuits - see manual)

	Input Cord Length Details DC INPUT: User supplies cabling. 0 gauge or larger (see manual). AC INPUT: hardwire

	Voltage Compatibility (VAC) 120

	Voltage Compatibility (VDC) 12

	Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries

	DC System Voltage (VDC) 12

	Battery Pack Accessory (Optional) 98-121 sealed lead acid battery(optional)

	Battery Charge 35A / 140A (selectable)

	LVC (Low Voltage Cut-Off) 10V DC +/-3%

	Expandable Runtime Yes

	Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

	Switches 3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant on/off control of the inverter system when used in conjunction with APSRM4 accessory(sold separately) in inverter mode. In AC uninterruptibl

	AC Suppression Joule Rating 450

	Cooling Method Multi-speed fan

	Material of Construction Steel

	Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)

	Relative Humidity 0-95% non-condensing

	Transfer Time (Line Power to Battery Mode) 16.6 milliseconds (typical - compatible with many computers - verify transfer time compatibility of loads for UPS applications)

	Low Voltage Transfer to Battery Power In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual)

	High Voltage Transfer to Battery Power In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 - see manual)

Load Sensing Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts. Load Sensing Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.

	Remote Control Capability Yes

	Certifications Tested to UL458 (USA) and CSA (Canada)

	Item Dimension (L inchxW inchxH inch) 16 x 16 x 24 Weight 67.70 lb Warranty Information 1-year limited warranty