OUTPUT

	Nominal Output Voltage(s) Supported 120V

	Frequency Compatibility 60 Hz

	Output Receptacles Hardwire

	Output (Watts) 2400

	Continuous Output Capacity (Watts) 2400

	Peak Output Capacity (Watts) 4800

	Output Voltage Regulation LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).

	Output Frequency Regulation 60 Hz (+/- 0.3 Hz)

	Overload Protection Includes 15A input breaker dedicated to the charging system and 20A output breaker for AC output loads.

	INPUT

	Nominal Input Voltage(s) Supported 120V AC

	Recommended Electrical Service DC INPUT: Requires 48VDC input source capable of delivering 56A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation).

	Maximum Input Amps / Watts DC INPUT: Full continuous load - 56A at 48VDC. AC INPUT: 33 amps at 120VAC with full inverter and charger load (13A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output load

	Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate

	Voltage Compatibility (VAC) 120

	Voltage Compatibility (VDC) 48

	Expandable Battery RuntimeRuntime is expandable with any number of user supplied wet or gel type batteries

	DC System Voltage (VDC) 48

	Battery Pack Accessory (Optional) 98-121 sealed lead acid battery(optional)

	Battery Charge 15A

	Expandable Runtime Yes

	Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.

	Cooling Method Multi-speed fan

	Material of Construction Polycarbonate

	Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)

	Relative Humidity 0-95% non-condensing

	Operating Temperature 32-104 Fahrenheit / 0-40 Celcius

	Transfer Time (Line Power to Battery Mode) 8 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)

	Low Voltage Transfer to Battery Power In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual)

	High Voltage Transfer to Battery Power In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 - see manual)

	Load Sensing Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.

	Remote Control Capability Yes

	Item Dimension (L inchxW inchxH inch) 14 x 15 x 22 Weight 38.60 lb Warranty Information 1 year limited