Allows users to run AC appliances from any properly-sized 12V battery or automotive DC system Converts 12V DC battery power to 120V AC power 1000 watts continuous output power 2000 watts peak output power(instantaneous) 4 outlets Compact, lightweight design with all-metal housing Remote control jack provides optional remote monitoring and control when used with optional remote module(APSRM4, sold separately) Low battery alarm with auto-shutoff prevents deep battery discharge High-efficiency operation conserves batteries to prolong run time

Battery charge level LEDs indicate the approximate charge level(high/medium/low) of connected batteries Connected load level LEDs indicate the approximate wattage load level(high/medium/low) of connected equipment Operating mode switch controls inverter operation Battery Charge Conservation Dial conserves battery power by setting the load-level at which the inverter automatically shuts off Cooling fan regulates internal temperature and prolongs service life Mounting flanges provide safe, fixed installation Grounding lug connects to vehicle ground Grooved cooling surface provides additional surface area for more efficient cooling

	Continuous Output Capacity (Watts) 1000

	Output Receptacles (4) 5-15R

	Output Nominal Voltage 120V

	Voltage Compatibility (VDC) 12

	Frequency Compatibility 60 Hz

	Output Receptacles (4) 5-15R

	Output (Watts) 1000

	Continuous Output Capacity (Watts) 1000

	Peak Output Capacity (Watts) 2000

	Output Nominal Voltage 120V

	Output Voltage Regulation Maintains PWM sine wave output voltage of 115 VAC (+/- 10% VAC)

	Output Frequency Regulation 60 Hz (+/- 5% Hz)

	Overload Protection Automatic overload protection shuts down inverter system in the event of overloads. Inverter and electrical system are further protected via four internal 40A automotive fuses

	Pure Sine Wave Output No

INPUT Recommended Electrical Service Requires 12V DC input source capable of delivering 100A for the required duration (when used at full capacity). For automotive applications, hardwire installation with 175A battery system fusing is recommended. Maximum Input Amps / Watts Full continuous load - 100A at 12V DC, No load - 1.5A at 12V DC, Shutdown / load sense mode - 100 micro amps Input Connection Type Set of 2 DC bolt-down wiring terminals Input Cord Length Details User supplies cabling. Minimum gauges for full load operation: 4 wire (12 ft max), 2 wire (20 ft max), 0 wire (31 ft max). Voltage Compatibility (VDC) 12

	BATTERY DC System Voltage (VDC) 12

USER INTERFACE, ALERTS CONTROLS Front Panel LEDs Set of 6 LEDs offer continuous status information on battery and connected load conditions Switches 3 position rocker switch enables on/off power control, plus "remote" setting which enables inverter to be remotely powered on or off when used in conjunction with APSRM4 Remote Control Module(sold separately) Audible Alarm Dual function alarm indicates overload conditions or low DC input voltage of 10.5V or less

	SPECIAL FEATURES Remote Control Capability Yes

	Item Dimension (L"xW"xH") 10.3 x 6.25 x 3.75 Weight 6.80 lb Warranty Information 1 Year