Output Nominal Output Voltage Supported: 120V Frequency Compatibility: 60Hz Output Receptacles: (2) 5-15R Output: 750W Continuous Output Capacity: 750W Peak Output Capacity: 1500W Output Voltage Regulation: LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%) Output Frequency Regulation: 60Hz (+/-0.3 Hz) Overload Protection: Includes 6A AC input breaker dedicated to the charging system and 8A output breaker for AC output loads

Input Nominal Input Voltage Supported: 120V AC Recommended Electrical Service: DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A 120V AC recommended Maximum Input Amps/Watts: DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 8 amps at 120VAC with full inverter and charger load (4.2A max charger-only) Input Connection Type: DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug Voltage Compatibility: 120V AC Voltage Compatibility: 12V DC

	Battery Expandable Battery Runtime: Runtime is expandable with any number of user supplied wet, gel or SLA batteries DC System Voltage: 12V DC Battery Charge: 20A Expandable Runtime: Yes

User Interface, Alerts and Controls Front Panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences. Switches: 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterrupted

	Surge / Noise Suppression AC Suppression Joule Rating: 450

	Physical Cooling Method: Multi-Speed Fan Material of Construction: Polycarbonate Receptacle Color: Black Form Factor Supported: Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)

	Environmental Relative Humidity: 0 to 95% Non-Condensing

Line / Battery Transfer Transfer Time (Line Power to Battery Mode): 16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications) Low Voltage Transfer to Battery Power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual) High Voltage Transfer to Battery Power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 - see manual)

	Special Feature Remote Control Capability: Yes

	Package Contents APS750 750W PowerVerter APS 12V DC 120V AC Inverter/Charger Owners Manual

	Item Dimension (L"xW"xH") 13 x 11 x 11 Weight 18.60 lb Warranty Information 1 Year Limited