Interface 2.5 inch

	Interface SATA Rev. 3.0 (6Gb/s) - with backwards compatibility to SATA Rev. 2.0 (3Gb/s)

	CapacitiesNote1 240GB

	Controller Marvell 88SS1074

	NAND 3D TLC

	Sequential Read/WriteNote2 240GB-960GB - up to 550/480MB/s

	Power Consumption 0.2W Idle / 0.6W Avg / 1.2W (MAX) Read / 2.5 W (MAX) Write

	Operating temperature 0oC to 70oC

	Storage temperature -40oC to 85oC

	Vibration operating 2.17G Peak (7-800Hz)

	Vibration non-operating 20G Peak (10-2000Hz)

	Life expectancy 1 million hours MTBF

	Total Bytes Written (TBW)Note3 240GB - 120TB

Note Note1: Some of the listed capacity on a Flash storage device is used for formatting and other functions and thus is not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingstons Flash Memory Guide Note2: For best performance, use a system with a USB 3.1 Gen 2 port and have UASP mode enabled. (Speed may vary due to host hardware, software, and usage.) Note3: Total Bytes Written (TBW) is derived from the JEDEC Workload (JESD219A).

	Item Dimension(L inchxW inchxH inch) 5 x 6 x 2 Weight 1.00lb