|
Complete System Only - Supermicro AS-1024US-TRT, 1U Rackmount Server, Dual AMD EPYC 7002 CPU, 32X DDR4 DIMMs, 2X 10GBE Lan, 4X 3.5 Inch Drive Bay, 1000W RPS
|
|
Images shown for reference only
|
|
|
|
|
|
Shipping Extra
|
|
ATACOM Part #:SYA1_SUPE_10_21
Manufacturer Part #:AS-1024US-TRT |
|
Price: $2370.95
|
|
|
|
|
|
|
AS -1024US-TRT |
|
|
|
CPU |
- Dual AMD EPYC™ 7002 Series Processors
- Socket SP3
- Supports CPU TDP up to 280W*
|
Cores |
|
Chipset |
|
Note |
* Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
|
|
|
Memory Capacity |
- 32 DIMM slots
- Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
- 8-channel memory bus
|
Memory Type |
- DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
|
DIMM Sizes |
- 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
VGA |
|
|
|
1U |
- 2 PCI-E 4.0 x16 (FH/HL 9.5") slots
- 1 PCI-E 4.0 x16 (LP) slot
- 1 PCI-E 4.0 x16 (internal proprietary LP slot)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
|
|
SATA |
|
LAN |
- Dual 10GBase-T LAN ports via Intel® X710-AT2
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 3 USB 3.0 ports (2 rear + 1 Type A)
|
VGA |
|
SAS |
- 4 SAS3 ports support via optional SAS kit
|
NVMe |
- 4 NVMe support via optional drive tray
|
Others |
- 1 COM port (rear)
- 2 SATA DOM power connector
- TPM 1.2 header
|
|
|
BIOS Type |
- AMI 128Mb SPI Flash EEPROM
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 5.1
- USB Keyboard Support
- SMBIOS 3.1.1
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Weight |
- Net Weight: 26 lbs (11.8 kg)
- Gross Weight: 41 lbs (18.6 kg)
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
|
|
Hot-swap |
- 4 Hot-swap 3.5" SATA3 drive bays
|
|
|
HDD Backplane |
- Supports 4 SATA3 or 4 NVMe or 4 SAS3 HDD
|
|
|
Fans |
- 8 heavy-duty PWM fans with optimal fan speed control
|
Air Shroud |
|
|
1000W Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7 - 5A / 50-60Hz
- 200-240Vdc / 7 - 5A (for CCC only)
|
+12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
- Max: 83A / Min: 0A (200-240Vdc)
|
12Vsb |
|
Output Type |
- 25 Pairs Gold Finger Connector
|
Certification |
Titanium Level [ Test Report ]
|
|
|
CPU |
- Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
- CPU switching voltage regulator
|
FAN |
- Up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I²C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)*
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
Note |
* Support for operating 35°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details.
|
|
|
|