|
|
Supermicro AS-1122GG-TF Opteron 6100, DDR3 1333, Dual GBLAN, IPMI, 6x 2.5 SATA, 2x InfiniBand Support, 2x GPU Support, 1400W PSU
|
|
Images shown for reference only
|
|
|
Supermicro AS-1122GG-TF Opteron 6100, DDR3 1333, Dual GBLAN, IPMI, 6x 2.5 SATA, 2x InfiniBand Support, 2x GPU Support, 1400W PSU w/ H8DGG-QF, SC118G-1400B Opteron 6100, DDR3 1333, Dual GBLAN, IPMI, 6x 2.5 SATA, 2x InfiniBand Support, 2x GPU Support, 1400W PSU
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: SYA1_SUPE_11_10
|
|
Price: $1157.76
|
|
|
|
|
| Model | | Brand | Supermicro | | AS-1122GG-TF | A+ Server 1122GG-TF (Black) | | Motherboard | Super H8DGG-QF | | Processor/Cache | | CPU | Dual 1944-pin Socket G34 Supports up to two Twelve/Eight-Core ready AMD Opteron™ 6100 Series processors HT3.0 Link support | | QPI | up to 6.4 GT/s | | System Memory | | Memory Capacity | Sixteen DIMM sockets Support up to 256GB DDR3 1333/1066/800 MHz memory * Quad channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks | | Memory Type | DDR3 1333/1066/800 MHz Registered ECC or unbuffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs | | DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB | | Memory Voltage | 1.35V or 1.5V | | Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | | On-Board Devices (per Node) | | SATA | AMD SP5100 (RAID 0, 1, 10) | | IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC | | Network Controllers | Intel® 82576 controller, Dual-Port
Gigabit Ethernet 10/100/1000BASE-T support | | VGA | Matrox G200 16MB DDR2 | | Super I/O | Winbond® W83527 chip | | Input / Output (per Node) | | SATA | 6x SATA2.0 (3Gb/s) Ports | | LAN | 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI | | USB | 4x USB 2.0 ports 2x Rear and 2x header | | VGA | 1x VGA port | | Serial Port | 1x Fast UART 16550 serial port 1x serial port header | | Chassis | | Form Factor | 1U Rackmount | | Model | SC118G-1400B | | Dimensions | | Form Factor | 1.7" x 17.2 " x 28.2" (H x W x D) | | Front Panel (per Node) | | Buttons | Power On/Off button System Reset button | | LEDs | Power status LED HDD activity LED 2x Network activity LEDs system Overheat LED | | Drive Bays (per Node) | | Hot-Swap | 6x 2.5" Hot-swap SATA drive bays Enterprise SATA HDD only recommended | | SATA Backplane | | SATA Backplane | SATA HDD Backplane | | System Cooling | | Fans | 8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control | | PSU | | Power Supply | 1400W high-efficiency power supply with PMBus |
| 1. 2x double-width full-height/length GPU cards supported; (GPU cards not included)
2. Dual AMD Opteron™ 6100 Series processors (Socket G34) Twelve/ Eight-Core ready; HT3.0 Link support
3. Up to 256GB DDR3 Registered ECC 1333/1066/800 SDRAM in 16 DIMMs
4. 2x full-height full-length PCI-e Gen 2.0 x16 slots; 1x low-profile PCI-e x8 Gen 2.0 in x16 slot (accommodates AOCs up to 6" in length) 5. Dual-port GbE LAN Controller, 4x USB 2.0 ports, 1x dedicated LAN for system management (IPMI2.0)
6. 6x 2.5" Hot-swap SATA Drive Bays
7. 2x InfiniBand cards supported
8. 1400W High-efficiency Power Supply 80Plus Gold Certified |
|
