Motherboard H11SSL-C Processor/Chipset CPU Single AMD EPYCTM 7000-series Processor (up to 200W) Socket SP3

	Cores Up to 32 Cores Chipset System on Chip (SoC) System Memory Memory Capacity 8 DIMM slots Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM 8-channel memory bus

	Memory Type DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs DIMM Sizes 4GB, 8GB, 16GB, 32GB, 64GB, 128GB Memory Voltage 1.2V

	Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices SATA/SAS SATA3 (6 Gbps) Broadcom 3008 SAS3 (12 Gbps) controller IR mode,RAID 0, 1, 10

	IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC Network Controllers Intel I210 Controller VGA ASPEED AST2500 BMC

	Expansion Slots 2U 3 PCI-E 3.0 x16 (low profile) 3 PCI-E 3.0 x8 (low profile) M.2 Interface: PCI-E 3.0 x4 Form factor: 2280, 22110

	Input / Output SATA/SAS 8 SATA3 (6 Gbps) / 8 SAS3 ports via Broadcom 3008 LAN 2x 1GbE LAN ports 1 RJ45 Dedicated IPMI LAN port

	USB 3 USB 3.0 ports 2 USB 2.0 ports VGA 1 VGA port Others 1 COM port (rear) 2 SATA DOM power connector TPM 1.2 header

	System BIOS BIOS Type AMI 128Mb SPI Flash EEPROM BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1

	Chassis Form Factor 2U Model SC825TQ-R740LPB

	Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED Drive Bays Hot-swap 8 hot-swap 3.5 inch SAS3/SATA3 Drive Bays

	Peripheral Drives DVD-ROM Slim DVD-ROM drive (optional) Backplane HDD Backplane Supports 8 SAS3/SATA3 3.5 inch HDD System Cooling Fans 3 heavy-duty PWM fans with optimal fan speed control

	Power Supply with Power Distributor 740W Redundant high-efficiency power supply with PMBus AC Input 100-240 V, 50-60 Hz, 9-3.5 Amp DC Output 4 Amp at +5V standby 61.7 Amp at +12V

	Certification Platinum Certified PC Health Monitoring CPU Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator FAN Fan status tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors

	Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic LED CPU / System Overheat LED Other Features Chassis Intrusion Detection Chassis Intrusion Header

	Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10oC to 35oC (50oF to 95oF) Non-operating Temperature: -40oC to 70oC (-40oF to 158oF) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

	Weight 69.00 LB

	Warranty Information 1 Year