|
|
Complete System Only - Supermicro AS-F2014S-RNTR, 4U Rackmount Server (4 Nodes), Each Node: Single AMD EPYC 7002 Series Processor, 8X DDR4 DIMMs, 1 VGA, 8X 3.5 Inch Drive Bays; 2200W RPS
|
|
Images shown for reference only
|
|
|
|
|
|
|
| Shipping Extra
|
|
ATACOM Part #:SYA2_SUPE_20_1B
Manufacturer Part #:AS-F2014S-RNTR |
|
Price: $6998.95
|
|
|
|
|
|
|
 |
 |
| AS -F2014S-RNTR |
- A+ Server F2014S-RNTR (Black)
|
| |
|
| CPU |
- Single AMD EPYC™ 7002 Series Processor
- Socket SP3
- Supports CPU TDP / cTDP up to 280W*
|
| Cores |
|
| Note |
* Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
|
| |
|
| Memory Capacity |
- 8 DIMM slots
- Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs
- 8-channel memory bus
|
| Memory Type |
- DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
|
| Memory Sizes |
- 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
|
| Network Controllers |
- Flexible networking via
AIOM (not included, must add 1 per node)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Graphics |
|
| |
|
| LAN |
- Flexible networking via AIOM
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
|
| VGA |
|
| Others |
- 1 COM port
- 1 TPM 2.0 header
|
| |
|
| BIOS Type |
- 256Mb SPI Flash EEPROM with AMI BIOS
|
| |
|
| Software |
|
| Power Configurations |
|
| |
|
| CPU |
|
| FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Package |
- 28.3" (W) x 15.0" (H) x 42.4" (D)
|
| Weight |
- Net Weight: 150 lbs (68.04 kg)
- Gross Weight: 200 lbs (90.71 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- Network activity LEDs
- Information LED (UID, Fan failure, Overheat)
|
| |
|
| PCI-Express |
- 1 PCI-E 4.0 x16 (Low-profile riser)
- 1 PCI-E 4.0 x8 (Internal RAID AOC)
|
| |
|
| Hot-swap |
- 8 Hot-swap 3.5" drive bays: Front 6 SATA (optional NVMe support), Rear 2 SATA/NVMe
|
| M.2 |
- M.2 Interface: 4 SATA/PCI-E 4.0 x4
- M.2 Form Factor: 2242, 2260, 2280, 22110
- M.2 Key: M-Key
|
| |
|
| 1 SATA/NVMe backplane |
| |
|
| Fans |
- 2x 8cm 13.5K RPM middle fans
|
| |
| 2200W Redundant Power Supplies with PMBus |
| Total Output Power and Input |
- 1200W with Input 100-127Vac
- 1800W with Input 200-220Vac
- 1980W with Input 220-230Vac
- 2090W with Input 230-240Vac
- 2200W with Input 220-240Vac (for UL/cUL use only)
- 2090W with Input 230-240Vdc (for CCC only)
|
| AC Input Frequency |
|
Dimension
(W x H x L) |
|
| +12V |
- Max: 100A / Min: 0A (100-127Vac)
- Max: 150A / Min: 0A (200-220Vac)
- Max: 165A / Min: 0A (220-230Vac)
- Max: 174.17A / Min: 0A (230-240Vac)
- Max: 183.3A / Min: 0A (220-240Vac)
|
| 5VSB |
|
| Output Type |
|
| Certification |
 
Titanium Level
[ Test Report ]
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
