|
|
Supermicro A+ Server AS-2113S-WN24RT, 2U Rackmount Server Barebone, Single AMD EPYC 7000 Series Processor, 16X DDR4, 24X 2.5 Inch Bays, 2X 10GBLan, M.2, IPMI, VGA, USB, PCI-E, 1200W Redundant PSU
|
|
Images shown for reference only
|
|
|
|
|
|
|
| Shipping Extra
|
|
ATACOM Part #:SYA2_SUPE_2S_71
Manufacturer Part #:AS-2113S-WN24RT |
|
Price: $2973.95
|
|
|
|
|
|
|
 |
 |
| AS -2113S-WN24RT |
|
| |
|
|
| CPU |
- Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required)
- Socket SP3
- Supports CPU TDP 225W / cTDP up to 240W*
|
| Cores |
- Up to 32 Cores (Board revision 1.x + 7001 Processors)
- Up to 64 Cores (Board revision 2.x + 7002 Processors)
|
| Chipset |
|
| |
|
| Memory Capacity |
- 16 DIMM slots
- Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
- Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
- 8-channel memory bus
|
| Memory Type |
- DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors)
- DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
|
| DIMM Sizes |
- 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*
(* Board revision 2.x required + 7002 Processors)
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2500 BMC
|
| Network Controllers |
- Broadcom BCM57416 Controller
|
| VGA |
|
| |
|
| PCI Express |
- 1 PCI-E 3.0 x16 (FH/HL) slot
|
| M.2 |
- Interface: PCI-E 3.0 x2 (NVMe based)
- Form Factor: 2280, 22110
- Key: Onboard M-key
- Number of M.2: Dual
|
| |
|
| NVMe |
- Up to 24 U.2 NVMe support
|
| LAN |
- 2x 10GbBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 5 USB 3.0 ports (4 rear + 1 Type A)
|
| VGA |
|
| Others |
- 1 COM port
- 2 SATA DOM power connectors
- TPM 1.2 header
|
| |
|
| BIOS Type |
- AMI 128Mb SPI Flash EEPROM
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 5.1
- USB Keyboard Support
- SMBIOS 3.1.1
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
- Net Weight: 34 lbs (15.42 kg)
- Gross Weight: 59 lbs (26.76 kg)
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
| |
|
| Hot-swap |
- 24 hot-swap 2.5" U.2 NVMe drive bays
|
|
|
| Fans |
- 3 heavy-duty PWM fans with optimal fan speed control
|
| Air Shroud |
|
| |
|
| 1200W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 15-12A / 50-60Hz
- 200-240Vac / 8.5-7A / 50-60Hz
- 200-240Vdc / 8.5-7A (for CCC only)
|
| +12V |
- Max: 83A / Min: 0A (100-127Vac)
- Max: 100A / Min: 0A (200-240Vac)
- Max: 100A / Min: 0A (200-240Vdc)
|
| +5Vsb |
|
| Output Type |
- 19 Pairs Gold Finger Connector
|
| Certification |
  Titanium Level
[ Test Report ]
|
| |
|
| CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
- CPU switching voltage regulator
|
| FAN |
- Up to 6-fan status tachometer monitoring
- Up to six 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 6x Fan connectors
- I²C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
