Motherboard H11SSW-NT

	Processor/Chipset CPU Single AMD EPYC 7001/7002 series Processor (Board revision 2.x required) Socket SP3 Supports CPU TDP 225W / cTDP up to 240W Cores Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors) Chipset System on Chip (SoC)

System Memory Memory Capacity 16 DIMM slots Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus Memory Type DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 240-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors) DIMM Sizes 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB ( Board revision 2.x required + 7002 Processors) Memory Voltage 1.2V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)

	On-Board Devices IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC Network Controllers Broadcom BCM57416 Controller VGA ASPEED AST2500 BMC

	Expansion Slots PCI Express 1 PCI-E 3.0 x16 (FH/HL) slot 2 PCI-E 3.0 x8 (FH/HL) slots 2 PCI-E 3.0 x8 (LP) slots M.2 Interface: PCI-E 3.0 x4 (NVMe based) Form Factor: 2280, 22110 Key: Onboard M-key Number of M.2: Dual

	Input / Output NVMe Up to 6 U.2 NVMe support via additional cables SATA 16 SATA3 (6 Gbps) ports LAN 2x 10GbBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port USB 5 USB 3.0 ports (4 rear + 1 Type A) VGA 1 VGA port Others 1 COM port 2 SATA DOM power connectors TPM 1.2 header

	System BIOS BIOS Type AMI 128Mb SPI Flash EEPROM BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1

	Chassis Form Factor 2U Model CSE-213AC8-R1K23WB

	Front Panel

	Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED

	Drive Bays Hot-swap 16 hot-swap 2.5" SATA3 drive bays Optional 6 U.2 NVMe drive support with additional cables

	Peripheral Drives Optional Optional slim DVD-ROM drive

	Backplane Hybrid Backplane Supports up to 8x 2.5" SAS3/SATA3 HDD/SSD and 6x SAS3/SATA3/NVMe Storage Devices

	System Cooling Fans 3 heavy-duty PWM fans with optimal fan speed control Air Shroud 1 Air Shroud

	Power Supply (76mm Width) 1200W Redundant Power Supplies with PMBus Total Output Power 1000W/1200W Input 100-127Vac / 15-12A / 50-60Hz 200-240Vac / 8.5-7A / 50-60Hz 200-240Vdc / 8.5-7A (for CCC only) +12V Max: 83A / Min: 0A (100-127Vac) Max: 100A / Min: 0A (200-240Vac) Max: 100A / Min: 0A (200-240Vdc) +5Vsb Max: 4A / Min: 0A Output Type 19 Pairs Gold Finger Connector Certification Titanium Level

PC Health Monitoring CPU Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator FAN Up to 6-fan status tachometer monitoring Up to six 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I2C Temperature Sensing Logic LED CPU / System Overheat LED Other Features Chassis Intrusion Detection Chassis Intrusion Header

	Operating Environment / Compliance RoHS RoHS Compliant Environmental Spec. Operating Temperature: 10oC to 35oC (50oF to 95oF) Non-operating Temperature: -40oC to 70oC (-40oF to 158oF) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

	Item Dimension (L"xW"xH") 25 x 18 x 4 Weight 59 lbs Warranty Information 1 year