Tyan System B8036T65V10E4HR 2U EPYC7002 SP3 4TB DDR4 2x2.5"HS SATA 225W Retail
Images shown for reference only
Shipping Extra
ATACOM Part #:SYA2_TYAN_B8_09
Manufacturer Part #:B8036T65V10E4HR
Price: $2478.95
System Form Factor 2U Rackmount Chassis Model TS65 Motherboard Name S8036GM2NE
Front Panel Buttons (1) RST / (1) PWR w/ LED / (1) UID LEDs (1) HDD / (1) ID / (1) UID / (1) System Event I/O Ports (2) USB 3.1 Gen1 ports
External Drive Bay Qty / Type (12) 3.5/2.5" Hot-Swap SSD/HDD (at front) + (2) 2.5" Hot-Swap SSD/HDD (at rear) HDD Backplane Support SAS 12Gb/s /SATA 6Gb/s /NVMe Supported HDD Interface (12) SATA 6Gb/s with (4) NVMe ports (at front) + (2) SATA 6Gb/s (at rear) Notification The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact Tyan technical support if a discrete SAS HBA/RAID adapter is required.
System Cooling Configuration FAN (3) 8cm fans
Power Supply Type CRPS Input Range AC 100-127V/10A / AC 200-240V/5A Frequency 50-60 Hz Output Watts 800 Watts Efficiency 80 plus Titanium Redundancy 1+1
Processor Qty / Socket Type (1) AMD Socket SP3 Supported CPU Series (1) AMD EPYC 7002 Series Processor Configurable Thermal Design Power (cTDP) Wattage Max up to 240W
Memory Supported DIMM Qty (16) DIMM slots DIMM Type / Speed DDR4 ECC RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 3200 Capacity Up to 2,048GB RDIMM / 4,096GB LRDIMM 3DS Memory channel 8 Channels per CPU Memory voltage 1.2V
Expansion Slots PCI-E (2) PCI-E Gen4 x8 slots (HH / HL w/ tall bracket) / (4) PCI-E Gen4 x8 slots (FH / HL) Pre-install TYAN Riser Card (PCI-E Gen4) (1) M8036-L24-3F riser card for (2) FH/HL + (1) HH/HL PCI-E Gen4 x8 slots (left) / (1) M8036-R24-3F riser card for (2) FH/HL + (1) HH/HL PCI-E Gen4 x8 slots (right) Others (1) PCI-E Gen3 x16 OCP 2.0 slot (conn.A+conn.B) / Conn. B of OCP 2.0 mezzanine is muxd with the HH/HL PCI-E x8 slot on M8036-R24-3F riser Physical Dimensions FH/FL (Full-height / Full-length): 4.4" x 12.3" (111.2 x 312mm) HH/ HL (Half-height / Half-length): 2.7" x 6.6" (68.9 x 167.7mm) FH/10.5L (Full-height / 10.5 in length ): 4.4" x 10.5" (111.2 x 266.7mm)
LAN Qty / Port (2) GbE ports + (1) GbE dedicated for IPMI Controller Broadcom BCM5720 PHY Realtek RTL8211E
Storage SATA Connector (2) SFF-8654 connectors for up to (16) SATA ports Controller Direct from AMD EPYC CPU Speed 6Gb/s RAID N/A Additional SATA Connector (2) 7-pin SATA for (2) rear SATA drives / (2) 7-pin SATA for (2) front SATA drives Controller Marvell 9235 Speed 6Gb/s RAID N/A NVMe Connector (M.2) (2) 22110/2280 (by PCI-E Gen3 and SATA interface) Connector (Slim SAS) (2) SFF-8654 for (4) NVMe ports
Graphic Connector type D-Sub 15-pin Resolution Up to 1920x1200 Chipset Aspeed AST2500
I/O Ports USB (2) USB3.1 Gen1 ports (at rear) / (2) USB3.1 Gen1 ports (via Cable) / (1) USB3.1 Gen1 port (Type-A) COM (1) DB-9 port (COM1) + (1) header (COM2) VGA (1) D-Sub 15-pin port RJ-45 (2) GbE ports, (1) dedicated GbE for IPMI
TPM (Optional) TPM Support Please refer to our TPM supported list.
System Monitoring Chipset Aspeed AST2500 Temperature Monitors temperature for CPU and memory and system environment Voltage Monitors voltage for CPU, memory, chipset and power supply LED Over temperature warning indicator / Fan and PSU fail LED indicator Others Watchdog timer support
Server Management Onboard Chipset Onboard Aspeed AST2500 AST2500 iKVM Feature 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub AST2500 IPMI Feature IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface
BIOS Brand / ROM size AMI / 32MB Feature Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / Console Redirection / ACPI 6.1 / ACPI sleeping states S0, S5 / FAN speed control automatic
Operating System OS supported list Please refer to our AVL support lists.
Regulation FCC (SDoC) Class A CE (DoC) Class A CB/LVD Yes RCM Class A VCCI Class A
Operating Environment Operating Temp. 10o C - 35o C (50o F- 95o F) Non-operating Temp. - 40o C - 70o C (-40o F - 158o F) In/Non-operating Humidity 90%, non-condensing at 35o C