| System | | Form Factor | 2U Rackmount |
| Chassis Model | TS75A |
| Chassis Dimension
(D x W x H) | 29.56" x 17.26" x 3.43" (750.8 x 438.4 x 87mm) |
| Motherboard Name | S8252GM2NE-2T |
| Motherboard Notification | # The motherboard not sold separately |
| Gross Weight | 30 kg (66 lbs) |
| Net weight | 19 kg (42 lbs) |
| Front Panel | | Buttons | (1) RST / (1) ID / (1) PWR w/ LED |
| LEDs | (1) HDD / (2) LAN / (1) ID / (1) BMC event |
| I/O Ports | (2) USB 3.1 Gen1 ports |
| External Drive Bay | | Q'ty / Type | (18) 2.5" Hot-swap SSD/HDD + (8) NVMe |
| HDD Backplane Support | SAS 12Gb/s /SATA 6Gb/s /NVMe |
| Supported HDD Interface | (18) SATA 6Gb/s + (8) NVMe |
| Notification | The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact Tyan technical support if a discrete SAS HBA/RAID adapter is required. |
| System Cooling Configuration | | FAN | (6) 6cm fans |
| Power Supply | | Type | CRPS |
| Input Range | AC 100-127V/12A / AC 200-240V/9.48A |
| Frequency | 50-60 Hz |
| Output Watts | 1,600 Watts |
| Efficiency | 80 plus Platinum |
| Redundancy | 1+1 |
| Processor | | Q'ty / Socket Type | (2) AMD Socket SP3 |
| Supported CPU Series | (2) AMD EPYC™ 7002 Series Processors |
| Configurable Thermal Design Power (cTDP) Wattage | Max up to 240W |
| Memory | | Supported DIMM Qty | (16)+(16) DIMM slots |
| DIMM Type / Speed | DDR4 ECC RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 3200 |
| Capacity | Up to 8192GB RDIMM |
| Memory channel | 8 Channels per CPU |
| Memory voltage | 1.2V |
| Expansion Slots | | PCI-E | (4) PCI-E Gen4 x8 slots (FH / HL) / (1) PCI-E Gen4 x8 slot (FH / HL) / (4) PCI-E Gen4 x8 slots (FH / 10.5”L) |
| Pre-installed TYAN Riser Card
(PCI-E Gen4) | (1) M8252T75-L24-2F riser card for (2) FH/10.5”L PCI-E Gen4 x8 slots (left) / (1) M8252T75-R24-3F riser card for (2) FH/10.5”L PCI-E Gen4 x8 + (1) FH/HL PCI-E Gen4 x8 slots (right) / (1) M8252T75-L16-2L riser card for (2) HH/HL PCI-E Gen4 x8 slots (left) / (1) M8252T75-R16-2L riser card for (2) HH/HL PCI-E Gen4 x8 slots (right) |
| Others | (1) PCI-E Gen4 x16 OCP 3.0 slot |
| Physical Dimension
Abbreviation | FH/FL (Full-height / Full-length): 4.4" x 12.3" (111.2 x 312mm) |
| LAN | | Q'ty / Port | (2) 10GbE ports, (1) GbE port dedicated for IPMI |
| Controller | Intel X550-AT2 |
| PHY | Realtek RTL8211E |
| Storage | SATA | Connector | (2) SFF-8654 connectors for up to (16) SATA ports |
| Controller | Direct from AMD EPYC CPU |
| Speed | 6Gb/s |
| RAID | N/A |
Additional
SATA | Connector | (2) SATA |
| Controller | Marvell 9235 |
| Speed | 6Gb/s |
| RAID | N/A |
| NVMe | Connector (U.2) | (4) SFF-8654 connectors for (8) front NVMe |
| Connector (M.2) | (2) 22110/2280 (by PCI-E Gen3 interface) |
| Graphic | | Connector type | D-Sub 15-pin |
| Resolution | Up to 1920x1200 |
| Chipset | Aspeed AST2500 |
| I/O Ports | | USB | (2) USB3.1 Gen1 ports (@ front) / (2) USB3.1 Gen1 ports (@ rear) |
| COM | (2) headers (COM1, COM2) |
| VGA | (1) D-Sub 15-pin port |
| RJ-45 | (2) 10GbE ports, (1) GbE dedicated for IPMI |
| System Monitoring | | Chipset | Aspeed AST2500 |
| Temperature | Monitors temperature for CPU & memory & system environment |
| Voltage | Monitors voltage for CPU, memory, chipset & power supply |
| LED | Over temperature warning indicator / Fan & PSU fail LED indicator |
| Others | Watchdog timer support |
| Server Management | | Onboard Chipset | Onboard Aspeed AST2500 |
| AST2500 iKVM Feature | 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub |
| AST2500 IPMI Feature | IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface |
| BIOS | | Brand / ROM size | AMI / 32MB |
| Feature | Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / Console Redirection / ACPI sleeping states S0,S1,S5 / FAN speed control automatic / ACPI 6.0 |
| Operating System | | OS supported list | Please refer to our AVL support lists. |
| Regulation | | FCC (DoC) | Class A |
| CE (DoC) | Class A |
| CB/LVD | Yes |
| C-Tick | Class A |
| VCCI | Class A |
| Operating Environment | | Operating Temp. | 10° C ~ 35° C (50° F~ 95° F) |
| Non-operating Temp. | - 40° C ~ 70° C (-40° F ~ 158° F) |
| In/Non-operating Humidity | 90%, non-condensing at 35° C |
| RoHS | | RoHS 6/6 Compliant | Yes |
| Package Contains | | Barebone | (1) TS75A-B8252 Barebone |
| Manual | (1) Quick Installation Guide |
