| Motherboard |
| |
• Super H8DCE
|
| Processor/Chipset |
| CPU |
• Dual 940-pin ZIF Sockets
• Supports up to two Dual-Core AMD Opteron™ 200 Series
processor(s)
• VRM x3
|
| Chipset |
• HyperTransport Link
• nVidia nForce Pro 2200 (CK804)
• nVidia nForce Pro 2050 (CKIO4)
|
| System Memory |
| Memory Capacity |
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR 400 MHz memory or
• Supports up to 16 GB DDR 333 MHz memory or
• Supports up to 32 GB DDR 266 MHz memory
• Single or Dual(recommended) channel memory
• For Single CPU: Memory must be populated in the
adjacent memory bank
• For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks
|
| Memory Type |
• DDR 400/333/266MHz buffered (registered) ECC SDRAM
72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
• 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
• 2.5 V only
|
| Error Detection |
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
|
| On-Board Devices |
| SATA |
• nVidia nForce Pro 2200 SATA2 Controller
• nVidia nForce Pro 2050 SATA2 Controller
• 8 SATA Ports
• nVidia RAID 2.0
• SATA RAID 0, 1, 0+1 support
|
| Network Controllers |
• nVidia nForce Pro 2200 & 2050 Dual Port Gigabit
Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output
|
| Audio |
• AC'97 audio CODEC with high quality 6-channel sound
• Front-side audio header
|
| Expansion Slots |
| PCI-Express |
• 2x PCI-e x16 slots
• 2x PCI-e x4 (using x8) slots
|
| PCI |
• 3x 32-bit PCI slots
|
| Input / Output |
| Serial ATA |
• Integrated SATA2 Controller
• Eight Serial ATA Connectors
• Eight SATA hard drives supported
|
| IDE |
• Dual ATA 133/100 EIDE channels support up to four
UDMA IDE devices
|
| Floppy |
• 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
• 2 RJ45 LAN port
|
| USB |
• FUCI
• Up to 8 USB Ports 2.0 Compliant, 1.1 Compatible
|
| Audio |
• 1 Line In / Line Out / Microphone ports
|
| Keyboard / Mouse |
• PS/2 keyboard and mouse ports
|
| Serial Ports |
• 2 Fast UART 16550 serial ports
|
| Parallel Ports |
• 1 ECP/EPP parallel port
|
| Chassis |
| Form Factor |
• Tower / 4U Rackmountable
• Optional Rackmount Kit (CSE-PT26)
|
| Model |
• SC743T-645
|
| Dimensions |
| Height |
• 7.0" (177mm)
|
| Width |
• 17.1" (434mm)
|
| Depth |
• 25.5" (647mm)
|
| Gross Weight |
• 63 lbs (28.6kg)
|
| Available Colors |
• Beige, Black
|
| Front Panel |
| Buttons |
• Power On/Off button
• System Reset button
|
| LEDs |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
|
| Ports |
• 2x USB Ports (2.0 Ready)
|
| Drive Bays |
| Hot-swap |
• 8x 1" SATA Hot-swap Drives
|
| Peripheral Bay(s)
[90 o Rotatable] |
• 2x 5.25" Peripheral Drive Bay
• 1x 5.25" Bay For Floppy Drive
|
| Peripheral Drives |
| Floppy |
• Panasonic 3.5" 1.44MB Floppy Drive
|
| SATA Backplane |
|
• SATA Hard Drive Backplane
|
| System Cooling |
| Fans |
• 4x 5000 RPM Hot-swappable PWM Cooling Fans
|
| Power Supply |
|
• 645W Low-Noise AC power supply with PFC
[ 24-pin, (4-pin, 8-pin) = 12V ]
|
| AC Voltage |
• 100 - 240V, 50/60Hz, 11-5.5 Amp
|
| DC Output |
• 5V + 3.3V = 160W
|
| +5V |
• 30.0 amp
|
| +5V standby |
• 4.0 amp
|
| +12V |
• 46.0 amp
|
| -12V |
• 0.6 amp
|
| +3.3V |
• 30.0 amp
|
| PC Health Monitoring |
| CPU |
• Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V
Standby, HyperTransport Link voltage 1.2V, memory
voltage 2.5V, nVidia nForce Pro 2200 & 2050 voltage
1.5V
• Up to 8 fan status
• Supports System Management Utility
• S3 Suspend To RAM (STR)
|
| FAN |
• Total up to 8-fan status
• 3-pin fan speed control or
• 4-pin PWM fan connector
|
| Temperature |
• Monitoring for CPU, chassis, environment
|
| LED |
• Overheat LED
|
| Other Features |
• Chassis Intrusion Header
|
| System BIOS |
| BIOS Type |
• 4Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• Fan Speed Control
|
