|
Supermicro SYS-1026GT-TRF SuperServer 1U Xeon 5600/5500, DDR3, IPMI, 2x GBLAN, 4x 2.5 Inch SATA, 1800w PSU w/ CSE-118G-R1800B , X8DTG-QF+ (Black)
|
|
Images shown for reference only
|
|
Supermicro SYS-1026GT-TRF SuperServer 1U Xeon 5600/5500, DDR3, IPMI, 2x GBLAN, 4x 2.5 Inch SATA, 1800w PSU w/ CSE-118G-R1800B , X8DTG-QF+ (Black) SYS-1026GT-TRF SuperServer 1U Xeon 5600/5500, DDR3, IPMI, 2x GBLAN, 4x 2.5 Inch SATA, 1800w PSU w/ CSE-118G-R1800B , X8DTG-QF+ (Black)
|
|
|
|
Shipping Extra
|
|
ATACOM Part #: SYI1_SUPE_10_15
|
|
Price: $2206.95
|
|
|
|
Model | Brand | Supermicro | SYS-1026GT-TRF | SuperServer 1026GT-TRF (Black) | Motherboard | X8DTG-QF+ | Processor/Cache | CPU | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W | QPI | up to 6.4 GT/s | System Memory | Memory Capacity | 6x 240-pin DIMM sockets Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Memory Mirroring supported | Memory Type | 1333 / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | DIMM Sizes | 1GB, 2GB, 4GB , 8GB , 16GB | Memory Voltage | 1.5 V / 1.35V | Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | On-Board Devices | GPU | Supports 3 GPU Cards such as NVIDIA Fermi M2090, M2070, M2050 | Chipset | Dual Intel® 5520 (Tylersburg) chipset + PLX 8647 + ICH10R | SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support | IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC | Network Controllers | Intel® 82576 Dual-Port GbE Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization 1x Realtek RTL8201N PHY (dedicated IPMI) | Graphics | Matrox G200eW 16MB DDR2 | Super I/O | Winbond W83527HG chip | Clock Generator | 932S421 chip | Input / Output | Serial ATA | 6 Serial ATA ports 6 SATA hard drives supported | LAN | 2 RJ45 LAN ports 1 RJ45 Dedicated IPMI LAN port | USB | 2 rear USB 2.0 ports | VGA | 1x VGA Port | Serial Port | 1 Serial header | Video | 1 VGA Connector | System BIOS | BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS | Model | SC809T-1200B | Chassis | Form Factor | 1U Rackmount | Model | CSE-118G-R1800B | Dimensions | Form Factor | 1.7" x 17.2 " x 30.6" (H x W x D) | Gross Weight | 37 lbs (16.78kg) | Front Panel | Buttons | Power On/Off button System Reset button | LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED | Expansion Slots | PCI-Express | 3 (x16) PCI-E 2.0 slot 1 (x8) PCI-E 2.0 (in x16) low-profile slot via riser card | Drive Bays | Hot-Swap | 4x 2.5" SATA Hot-swap drive bays | Backplane | Backplane | SAS/SATA HDD Backplane (SAS support requires optional SAS controller) | System Cooling | Fans | 10x 4cm heavy duty counter-rotating fans with optimal fan speed control | PSU | Power Supply | 1800W (1+1) Redundant 1800W power supply with PMBus | AC Input | 1000W Output @ 100-120V, 12-10A, 50-60Hz 1200W Output @ 120-140V, 12-10A, 50-60Hz 1800W Output @ 200-240V, 10-8.5A, 50-60Hz | DC Output | 1000W: +12V/84A; +5Vsb/4A 1200W: +12V/100A; +5Vsb/4A 1800W: +12V/150A; +5Vsb/4A | | 1. Intel® Xeon® processor 5600/5500 series (dual), with QPI up to 6.4 GT/s 2. Up to 96GB DDR3 1333/1066/800MHz ECC Registered DIMM 3. 3 (x16) PCI-E 2.0 slots (support 3 GPU cards, i.e. M2090, M2070, M2050) 4. 1 (x8) PCI-E 2.0 (in x16) low-profile slot via riser card 5. Integrated IPMI 2.0 with KVM and Dedicated LAN 6. Intel® 82576 Dual-Port Gigabit Ethernet Controller 7. 4x Hot-swap 2.5" SATA Drive Bays 8. 1800W Platinum-level Redundant Power Supplies 9. 10x Counter rotating fans w/ optimal fan speed control 10. Smart server management tools |
|