| Model |
| Brand | Supermicro |
| SYS-1027R-WRFT+ | SuperServer 1027R-WRFT+ (Black) |
| Motherboard | Super X9DRW-3TF+ |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 (up to 130W TDP)
Dual Socket R (LGA 2011) |
| Cache | Up to 20MB |
| QPI | QPI up to 8 GT/s |
| GPU | supports M2075/M2090, up to 130W CPU at 35°C
supports K10 (Kepler), up to 130W CPU at 35°C
supports K10 (Kepler), up to 135W CPU at 30°C |
| System Memory |
| Memory Capacity | 8x 240-pin DDR3 DIMM sockets
Supports up to 256 GB DDR3 ECC Registered memory (RDIMM) |
| Memory Type | 1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors
Detects double-bit errors
(using ECC memory) |
| On-Board Devices |
| GPU | 1x NVIDIA Tesla M2090 Fermi GPU card |
| Chipset | Intel® C602 Chipset |
| SATA | Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support |
| SAS | - |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC |
| Network Controllers | Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100GBASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | GPIO |
| Super I/O | Nuvoton W83527 |
| Input / Output |
| SATA | 2 SATA 3.0 ports (6Gbps)
4 SATA 2.0 ports (3Gbps) |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port |
| USB | 6 USB 2.0 ports total
(2 rear + 4 via headers) |
| VGA | 1 VGA Connector |
| Serial Port / Header | 1 Serial header |
| DOM | 1 DOM (Disk on Module) power connector |
| System BIOS |
| BIOS Type | 64Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.3
UEFI
RTC (Real Time Clock) Wakeup |
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-818G-1K43B |
| Dimensions |
| Form Factor | 1.7" x 17.2 " x 28.2" (H x W x D) |
| Gross Weight | 42.9 lbs (19.5kg) |
| Front Panel |
| Buttons | Power On/Off button
System Reset button |
| LEDs | Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED |
| Expansion Slots |
| PCI-Express | 2 (x16) PCI-E 3.0 slots (1x NVIDIA Tesla M2090 Fermi GPU card integrated)
1 (x8) PCI-E 3.0 slot for I.B. card |
| Drive Bays |
| Hot-Swap | 3x 3.5" Hot-swap drive bays |
| Backplane |
| Backplane | - |
| Peripheral Drives |
| DVD-ROM | - |
| System Cooling |
| Fans | 8x counter-rotating fans with optimal fan speed control |
| Power Supply |
| Power Supply | 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 |
| AC Voltage | 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz
1400W: 180-240 V, 10.5-8.0A, 50-60 Hz |
| +5V standby | 6 Amp |
| +12V | 100 Amp/115 Vac
117 Amp/230 Vac
With Distributor
+5V: 30Amp
+3.3V: 25Amp
-12V: 0.6Amp
Certification
80PLUS Platinum |
