|
|
Supermicro SYS-6017TR-TF 1U LGA2011 C602J, 2 Node, 2x 3.5 HDD, 2x GBLAN, IPMI, 1280W PSU w/ X9DRT-F, CSE-808BT-1K28B SuperServer
|
|
Images shown for reference only
|
|
|
Supermicro SYS-6017TR-TF 1U LGA2011 C602J, 2 Node, 2x 3.5 HDD, 2x GBLAN, IPMI, 1280W PSU w/ X9DRT-F, CSE-808BT-1K28B SuperServer SYS-6017TR-TF 1U LGA2011 C602J, 2 Node, 2x 3.5 HDD, 2x GBLAN, IPMI, 1280W PSU w/ X9DRT-F, CSE-808BT-1K28B SuperServer
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: SYI1_SUPE_17_46
|
|
Price: $1794.95
|
|
|
|
|
 | Model | | Brand | Supermicro | | SYS-6017R-WRF | SuperServer 6017R-WRF (Black) | | Motherboard | Super X9DRW-iF | | Processor/Cache | | CPU | Intel® Xeon® processor E5-2600 (up to 130W TDP)
Dual Socket R (LGA 2011) | | Cache | Up to 20MB | | QPI | QPI up to 8 GT/s | | GPU | - | | System Memory | | Memory Capacity | 8x 240-pin DDR3 DIMM sockets
Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
Supports up to 64 GB DDR3 ECC Un-Buffered memory (UDIMM) | | Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | | DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB | | Memory Voltage | 1.5 V / 1.35V | | Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) | | On-Board Devices | | GPU | - | | Chipset | Intel® C602J Chipset | | SATA | Via Cable for SATA controller
SATA 2.0 (3Gbps) & 3.0 (6Gbps) with RAID 0, 1 | | SAS | - | | IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC | | Network Controllers | Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) | | Graphics | Matrox G200eW | | Super I/O | - | | Input / Output | | SAS | 2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps) | | LAN | 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port | | USB | 3x USB 2.0 ports (2x rear + 1x Type A) | | VGA | 1x VGA port | | Serial Port / Header | 1x Fast UART 16550 port / 1 Header | | DOM | - | | System BIOS | | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | | BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI | | Chassis | | Form Factor | 1U Rackmount | | Model | CSE-808BT-1K28B | | Dimensions | | Form Factor | 1.7" x 17.2 " x 27.75" (H x W x D) | | Gross Weight | 40 lbs (20.9kg) | | Front Panel | | Buttons | Power On/Off button
System Reset button | | LEDs | Power status LED
HDD activity LED
2x Network activity LEDs
Information LED | | Expansion Slots | | PCI-Express | 1x PCI-E 3.0 x16 Low-profile | | Drive Bays | | Hot-Swap | 2x 3.5" Hot-swap SATA HDD trays | | Backplane | | Backplane | 1x 1U SAS / SATA backplane | | Peripheral Drives | | DVD-ROM | - | | System Cooling | | Fans | 3x 4cm counter-rotating fans w/ optimal fan speed control | | Power Supply | | Power Supply | 1280W High-Efficiency (95%+) power supply | | AC Voltage | 1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz | | DC Output | 1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification
80 PLUS Platinum
[ Test Report ] | | DC Output +12V | - | | | Key Features Two systems (nodes) in a 1U form factor. Each node supports the following:
1. Dual Intel® Xeon® processor E5-2600
family; QPI up to 8GT/s
2. Up to 256GB DDR3 1600MHz ECC
Registered DIMM; 8x DIMM sockets
3. 1x Low-profile PCI-E 3.0 x16 slot
4. I/O ports: 1 VGA, 1 COM, 2 GbE LAN,
2 USB 2.0 ports, 1 dedicated LAN for
system management
5. 2x 3.5" Hot-swap SATA3 HDD Bays
6. 1280W Digital Switching Power Supply
80PLUS, Platinum Level (95%) |
|
