| Product SKUs |
| Brand | Supermicro |
| SYS-1028R-WC1RT | SuperServer 1028R-WC1RT (Black) |
| Motherboard |
| Super X10DRW-iT |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **) Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | Please contact your Supermicro sales representative for additional details. |
| System Memory |
| Memory Capacity | 16x 288-pin DDR4 DIMM sockets Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset | Intel® C612 Chipset |
| SATA | SATA3 via Intel® C610; RAID 0, 1 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | ASPEED AST2400 BMC |
| Input / Output |
| Serial ATA | 2x SATA3 (6Gbps) ports |
| SAS | 8x SAS3 (12Gbps) ports |
| LAN | 2x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 6x USB 3.0 ports (4 rear + 2 via header) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 header |
| DOM | 2x SuperDOM (Disk on Module) ports |
| PC Health Monitoring |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
| FAN | 6x 4-pin fan headers (up to 6 fans) 6x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header SDDC Support RoHS |
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-116AC2-R706WB |
| Dimensions and Weight |
| Width | 17.2" (437mm) |
| Height | 1.7" (43mm) |
| Depth | 23.5" (597mm) |
| Gross Weight | 46 lbs (20.9kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button UID button |
| LEDs | Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED |
| Expansion Slots |
| PCI-Express | 2 PCI-E 3.0 x16 full-height, Half-length slots |
| Drive Bays |
| SAS / SATA HDD trays (connected to onboard storage controller) |
| Backplane |
| SAS/SATA HDD Backplane Optional 2x 2.5" NVMe drives |
| System Cooling |
| Fans | 5x 4cm heavy-duty counter-rotating fans w/ air shroud and optimal fan speed control |
| Power Supply |
| 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C |
| AC Voltage | 700W: 100 - 140 V, 50-60 Hz 750W: 200 - 240V, 50-60 Hz |
| DC Output +5V standby | 3 Amp |
| DC Output +12V | 700W: 58 Amp @ 100-140V 750W: 62 Amp @ 200-240V |
| Certification |  Platinum Certified (Cert. in progress)
|
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 BIOS resuce hot keys USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| Management |
| Software | SuperDoctor® 5 Watch Dog NMI IPMI 2.0 Intel Node Manager |
| Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
| Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
