Supermicro SYS-1028U-TN10RT+ Intel C612 Dual Xeon E5-2600 v3 Socket R3

Supermicro SYS-1028U-TN10RT+ Intel C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2011) 1U Rackmount Server Barebone, DDR4, 2 x 10GBLAN, IPMI, 10 x 2.5in Drive Bays, PCI-E, SATA, SAS, 6 x NVMe, 1000W Redundant Power Supply, w/ X10DRU-i+ & CSE-119UAC2-R1K02

Images shown for reference only

Sold as Complete System Only with CPU, Memory, Hard Drive and Other Components Installed, Please contact Sales for Special Requirements

Shipping Extra

ATACOM Part #: SYI1_SUPE_1D_0K

Manufacturer Part#:SYS-1028U-TN10RT+

Price: $2547.95

Product SKUs
Brand	Supermicro
Manufacturer Part Number	SYS-1028U-TN10RT+
Motherboard
	Super X10DRU-i+
Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) * Dual Socket R3 (LGA 2011) QPI up to 9.6 GT/s
Note	† BIOS version 2.0 or above is required
Cache	Up to 22 Cores† / Up to 55MB† Cache
System Memory
Memory Capacity	24x 288-pin DDR4 DIMM slots Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type	2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage	1.2 V
On-Board Devices
Chipset	Intel® C612 Chipset
SATA	SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	2 10GBase-T ports via AOC-URN6-i2XT Intel® X540 10GBase-T 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics	ASPEED AST2400 BMC
Input / Output
NVMe/SAS	6 NVMe ports (NVMe from CPU 1) 4 NVMe/SAS3 Hybrid ports (NVMe from CPU 2)
LAN	2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port
USB	5 USB 3.0 ports (2 rear, 2 front, 1 Type A)
Video	1x VGA Connector
Serial Port / Header	1x Serial header
DOM	2 SuperDOM (Disk on Module) ports
Chassis
Form Factor	1U Rackmount
Model	CSE-119UAC2-R1K02
Dimensions
Width	17.2" (437mm)
Height	1.7" (43mm)
Depth	27.82" (707mm)
Weight	48 lbs (21.8 kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button System UID button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs UID LED
Expansion Slots
PCI-E	3 PCI-E 3.0 x8 slots (2 Full-height 10.5" L; 1 Low-profile) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap	10x 2.5" Hot-swap drive bays 6 NVMe ports (NVMe from CPU 1) 4 NVMe/SAS3 hybrid ports for optional SAS3/SATA3 (NVMe from CPU 2)
System Cooling
Fans	8 heavy duty fans with optimal fan speed control
Air Shroud	1 Air Shroud
Power Supply
	1000W Redundant Power Supplies with PMBus Total Output Power: 800W/1000W Dimension (W x H x L): 73.5 x 40 x 203 mm Input : 100-127Vac / 9.8 - 7A / 50-60Hz 200-240Vac / 7 - 5A / 50-60Hz +12V: Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) 12Vsb: Max: 2.1A / Min: 0A Output Type: 25 Pairs Gold Finger Connector Certification: UL/cUL/CB/BSMI/CE/CCC Titanium Level
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4^†/ v3 family; QPI up to 9.6GT/s

2. Up to 3TB^† ECC 3DS LRDIMM , up to
DDR4- 2400^†MHz ; 24x DIMM slots

3. 3 PCI-E 3.0 x8 slots
(2 FH 10.5" L, 1 LP)

4. 2 10GBase-T ports

5. 10 2.5" Hot-swap Drive Bays:
    6 NVMe ports (NVMe from CPU 1);
    4 NVMe/SAS3 hybrid ports for optional
    SAS3/SATA3 (NVMe from CPU 2)

6. 8 heavy duty fans w/ optimal
fan speed control

7. 1000W Redundant Power Supplies
Titanium Level (96%)