Supermicro SYS-1028TP-DTFR 1U Rackmount High Density-Server Barebone (

Supermicro SYS-1028TP-DTFR 1U Rackmount High Density-Server Barebone (2 Nodes), C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2011) DDR4, 4 x 2.5in Bays, GBLAN, IPMI, Infiniband, SATA, PCI-E,USB Per Node 1000W Redundant PSU, w/X10DRT-PIBF & CSE-809H-R1K05

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI1_SUPE_1D_1F

Manufacturer Part#:SYS-1028TP-DTFR

Price: $3780.95

Product SKUs
Brand	Supermicro
Manufacturer Part Number	SYS-1028TP-DTFR
Motherboard
	Super X10DRT-PIBF
Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) QPI up to 9.6 GT/s
Note	† BIOS version 2.0 or above is required
Cache	Up to 22 Cores† / Up to 55MB† Cache
System Memory
Memory Capacity	16x 288-pin DDR4 DIMM slots Up to 2TB† ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type	2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB
Memory Voltage	1.2 V
On-Board Devices
Chipset	Intel® C612 Chipset
Infiniband	Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller
SATA	SATA3 (6Gbps) w/ RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	ASPEED AST2400 BMC
Input / Output
SATA	4x SAS3 (12Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports (rear)
Infiniband	1x external QSFP Infiniband connector
Video	1x VGA Port
Serial Port / Header	1x Fast UART 16550 port / 1 Header (internal)
Chassis
Form Factor	1U Rackmount
Model	CSE-809H-R1K05
Dimensions
Width	19.1" (485mm)
Height	1.7" (43mm)
Depth	29.5" (750mm)
Package	8" (203mm) x 29.6" (752mm) x 38.4" (975mm)
Weight	Gross Weight: 48.1 lbs (21.9 kg) Net Weight: 33.5 lbs (15.2 kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button UID button/LED
LEDs	Power status LED Network activity LED Universal Information (UID) LED
Expansion Slots
PCI-E	1x PCI-E 3.0 x16 Low-profile slot
Drive Bays
Hot-swap	4x 2.5" Hot-swap SAS3 drive bays
System Cooling
Fans	3x heavy duty counter rotating fans with air shroud and optimal fan speed control
Power Supply
	1000W Redundant Power Supplies with PMBus Total Output Power :800W/1000W Dimension (W x H x L): 38 x 40 x 360 mm Input 100-127Vac / 9-7.5A / 50-60Hz 200-240Vac / 6-5A / 50-60Hz +12V Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) +5Vsb Max: 4A / Min: 0A Output Type Gold Finger Connector (16 Power Pin, 14 Signal Pin) Certification: UL/cUL/CB/BSMI/CE/CCC Titanium Level
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Two hot-pluggable systems (nodes) in a 1U form factor. Each node supports the following:

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4^†/ v3 family; QPI up to 9.6GT/s

2. Up to 2TB^† ECC 3DS LRDIMM , up to
DDR4- 2400^†MHz ; 16x DIMM slots

3. 1x PCI-E 3.0 x16 Low-profile slot
and 1x "0 slot"

4. Single port IB (FDR, 56Gbps),
w/ QSFP connector

5. Intel® i350 Dual port GbE LAN

6. Integrated IPMI 2.0 with KVM and
Dedicated LAN

7. 4x 2.5" Hot-swap SATA3 drive bays

8. 1000W Redundant Power Supplies
Titanium Level (96%)