| Product SKUs |
| Brand | Supermicro |
| SYS-1018R-WC0R | SuperServer 1018R-WC0R (Black) |
| Motherboard |
| Super X10SRW-F |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600/1600 v3 family (up to 145W TDP **) Single Socket R3 (LGA 2011) |
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| Note | Please contact your Supermicro sales representative for additional details. |
| System Memory |
| Memory Capacity | 8x 288-pin DDR4 DIMM sockets Up to 512GB DDR4 ECC LRDIMM Up to 256GB DDR4 ECC RDIMM |
| Memory Type | 2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit, 284-pin gold-plated DIMMs |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset | Intel® C612 Express chipset |
| SATA | SATA3 (6Gbps) via C612 controller RAID 0, 1, 10 support; 5 supported under Windows |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC with 10/100/1000Mbps |
| Network Controllers | Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| VGA | ASPEED AST2400 BMC |
| Input / Output |
| SATA | 10x SATA3 (6Gbps) ports SATA DOM Power Connector |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB 3.0 ports (rear) 2x USB 2.0 ports (rear) 2x USB 3.0 ports (front) |
| VGA | 1x VGA port |
| Serial Port / Header | 2x COM ports (1 rear, 1 header) |
| DOM | 2x SuperDOM (Disk on Module) ports |
| PC Health Monitoring |
| Voltage | Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | 6x 4-pin fan headers 6x fans w/ tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU & chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED +5V Standby alert LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-116AC-R706WB |
| Dimensions and Weight |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 23.5" (597mm) |
| Package | 8" (H) x 24" (W) x 32" (D) |
| Weight | Gross Weight: 40 lbs (18.1 kg) Net Weight: 25 lbs (11.3 kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
| Expansion Slots |
| PCI-Express | 2x PCI-E 3.0 x16 Full-height Full-length slots 1x PCI-E 3.0 x8 (in x16) Half-height Half-length slot |
| Drive Bays |
| Hot-swap | 8x 2.5" Hot-swap SAS3/SATA3 HDD bays + 2x 2.5" Hot-swap SATA3 (total of 10) |
| Backplane |
| SAS3/SATA3 HDD Backplane (SAS support requires optional SAS controller + cables) |
| System Cooling |
| Fans | 3x 40x28mm 4-pin PWM Cooling Fans 1x Optional fan to cool add-on cards |
| Power Supply |
| 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C |
| AC Voltage | 700W: 100 - 140 V, 50-60 Hz 750W: 200 - 240V, 50-60 Hz |
| DC Output +5V standby | 3 Amp |
| DC Output +12V | 700W: 58 Amp @ 100-140V 750W: 62 Amp @ 200-240V |
| Certification |  Platinum Certified (Cert. in progress)
|
| System BIOS |
| BIOS Type | 64Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.7.1 UEFI 2.3.1 RTC (Real Time Clock) Wakeup |
| Management |
| Software | IPMI (Intelligent Platform Management Interface) v2.0 with KVM support SuperDoctor® III Watch Dog NMI |
| Power Configurations | ACPI / ACPM Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on |
| Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
