Supermicro SYS-5018D-MTRF 1U Rackmount Intel XEON 4th Gen Intel C224 L

Supermicro SYS-5018D-MTRF 1U Rackmount Intel XEON 4th Gen Intel C224 LGA2011 SuperServer DDR3, 2x GBLAN, PCI-E X8, 4x 3.5 Hot-Swap HDD, SATA 6G, RAID, IPMI, VGA, 400W PSU, DOM, USB 3.0 w/ X10SLM-F, CSE-813MTQ-R400CB: SYS-5018D-MTRF

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI1_SUPE_50_1U

Manufacturer Part #: SYS-5018D-MTRF

Price: $991.95

Model
Brand	Supermicro
Product SKUs	SuperServer SYS-5018D-MTRF (Black)
Motherboard	Super X10SLM-F
Processor/Cache
CPU	Intel® Xeon® processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors Socket H3 (LGA 1150)
System Memory
Memory Capacity	4x 240-pin DDR3 DIMM sockets Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
DIMM Type	1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	8GB, 4GB, 2GB, 1GB
Memory Voltagel	1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)
On Board Devices
Chipset	Intel® C224 Express PCH
SATA	SATA3 (6Gbps) w/ RAID 0, 1, 10 , 5 SATA2 (3Gbps) w/ RAID 0, 1
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Aspeed AST2400 BMC with 10/100/1000Mbps
Network Controllers	Intel® i217LM + Intel® i210AT Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	Aspeed AST2400 BMC
Input / Output (Per Node)
Serial ATA	4x SATA3 (6Gbps) ports 2x SATA2 (3Gbps) ports SATA DOM Power Connector
LAN	2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	4x USB 3.0 ports (1 Type-A, 2+1 via header) 6x USB 2.0 ports (4 rear, 2 via header)
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 serial port 1x internal header
PC Health Monitoring
Voltage	Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of five 4-pin fan headers supporting up to 5 fans 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED +5V Standby alert LED
Other Features	Chassis intrusion detection Chassis intrusion header
Chassis
Form Factor	1U Rackmount
Model	CSE-813MTQ-R400CB
Dimentions
Width	17.2" (437mm)
Height	1.7" (43mm)
Depth	19.8" (503mm)
Weight	Gross Weight: 31.4 lbs (14.3 kg) Net Weight: 18.6 lbs (8.5 kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power status LED HDD activity LED 2x Network activity LEDs System Overheat LED
Expansion Slots(Per Node)
PCI-Express	1x PCI-E 3.0 x8 (in x16) Full-height slot
Drive Bays (Per Node)
Hot-swap	3x 3.5" Hot-swap SAS/SATA HDD trays
Peripheral Bay	Slim optical drive (optional)
Backplane
SAS2/SATA3 HDD Backplane	(SAS support requires optional SAS controller)
System Cooling
Fans	4x 4cm 12,500 RPM PWM fans Optional fans to cool add-on cards
Power Supply
Note	400W (1+1) Redundant SuperCompact Short-depth AC-DC Gold-level power supply with PMBus and I2C
AC Input	400W: 100-240 V, 50-60 Hz, 6-3 Amp
DC Output +5V standby	3 Amp
DC Output +12V	33 Amp
With Power Distributor	+5V: 25 Amp +3.3V: 25 Amp -12V: 0.6 Amp
System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3
Management
Software	IPMI (Intelligent Platform Management Interface) v2.0 with KVM support SuperDoctor® III Watch Dog NMI
Power Configurations	ACPI / ACPM Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on
Operating Environment/Compliance
RoHS	RoHS2 (2011/65/EU) Compliant
Opetraing Temperature	10°C to 35°C (50°F to 95°F)
Non-operating Temperature	-40°C to 70°C (-40°F to 158°F)
Operating relative Humidity	8% to 90% (non-condensing)
Non-operating Humidity	5% to 95% (non-condensing)

1. Single socket H3 (LGA 1150) supports
Intel® Xeon® E3-1200 v3, 4th gen.
Core i3, Pentium, Celeron processors
2. Intel® C224 Express PCH
3. 4x 3.5" Hot-swap SATA3 HDD bays
4. 1x PCI-E 3.0 x8 (in x16) Full-height slot
5. Up to 32GB DDR3 ECC 1600MHz
UDIMMs in 4 sockets
6. Dual Gigabit Ethernet LAN ports
(1x Intel® i217LM & 1x Intel® i210AT)
7. IPMI 2.0 on Dedicated LAN port
8. 400W Redundant Power Supplies
Optional Battery Backup Power (BBP®)