| Product SKUs |
| SYS-5018R-MR |
SuperServer 5018R-MR (Black) |
| Motherboard |
| Super X10SRi-F |
|
| Processor |
| CPU |
Intel® Xeon® processor E5-2600/1600 v3 family (up to 145W TDP **) Single Socket R3 (LGA 2011) |
| Core/Cache |
Up to 18 Cores / Up to 45MB Cache |
| Note |
Motherboard supports this maximum TDP. Please verify your system can thermally support |
| Systerm Memory |
| Memory Capacity |
8x 284-pin DDR4 DIMM sockets Up to 512GB DDR4 ECC LRDIMM Up to 256GB DDR4 ECC RDIMM |
| Memory Type | 2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit, 284-pin gold-plated DIMMs |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB |
| Memory Voltage |
1.2V |
| Error Detection |
Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset |
Intel® C612 Express chipset |
| Serial ATA |
SATA3 (6Gbps) via C612 controller RAID 0, 1, 10 support; 5 supported under Windows |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers |
Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Video |
ASPEED AST2400 BMC |
| Input / Output |
| Serial ATA |
10x SATA3 (6Gbps) ports |
| LAN |
2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB |
2x USB 3.0 ports (2 rear) 4x USB 2.0 ports (2 rear + 2 front) |
| Video |
1x VGA port> |
| Serial Port / Header | 1x Fast UART 16550 serial port 1x internal header |
| DOM |
1x Fast UART 16550 serial port 1x internal header |
| PC Health Monitoring |
| Voltage |
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| FAN |
Total of 6 fan headers supporting up to 6 fans 6 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperture | Monitoring for CPU and chassis environment CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header Chipkill support RoHS, Halogen Free |
| Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-813MTQ-R400CB |
| Dimensions |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 19.85" (503mm) |
| Weight |
Gross Weight: 31.4 lbs (14.3 kg) Net Weight: 18.6 lbs (8.5 kg) |
| Available Colors |
Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs |
Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
| Expansion Slots |
| PCI-Express | 1x PCI-E 3.0 x16 slot |
| Drive Bays |
| Hot-swap | 4x 3.5" Hot-swap drive bays |
| Peripheral Drives |
| Optional | Optional slim optical device bay, optional FDD/USB bay 2x 2.5" Fixed drives internal |
| Backplane |
| SAS/SATA HDD Backplane (SAS support requires optional SAS controller) | |
| System Cooling |
| Fans | 4x 40x28mm 4-pin PWM Cooling Fans |
| Power Supply |
| 400W (1+1) Redundant SuperCompact Short-depth AC-DC Gold-level power supply with PMBus and I2C | |
| DC Output +5V standby | 3 Amp |
| DC Output +12V | 33 Amp |
| With Power Distributor | +5V: 25 Amp +3.3V: 25 Amp -12V: 0.6 Amp |
| System BIOS |
| BIOS Type | 8MB SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
