|
|
Complete System Only -- Supermicro 1029U-TN12RV, 1U Rackmount Server Barebone, Dual Intel Xeon Scalable Socket P(LGA3647)/2nd Gen CPU, C621 chipset, 24X DDR4, 12X 2.5 Inch Bays (NVMe/SATA3), VGA, 1600W Redundant PSU
|
|
Images shown for reference only
|
|
|
|
|
|
|
| Shipping Extra
|
|
ATACOM Part #:SYI1_SUPE_C2_93
Manufacturer Part #:1029U-TN12RV |
|
Price: $2582.95
|
|
|
|
|
|
|
 | |
 | | SYS-1029U-TN12RV |
- SuperServer 1029U-TN12RV (Black)
|
| |
 |
| CPU |
- Dual Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
Dual UPI up to 10.4GT/s
- Support CPU TDP 70-205W
|
| Cores |
|
| Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R).
Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information. |
| |
|
| Memory Capacity |
- 24 DIMM slots
- Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
| Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
- 2666 ECC DDR4 NVDIMM
|
| Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.
|
| | |
| | Chipset |
|
| SATA |
|
| Network Connectivity |
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Graphics |
|
| | |
| | NVMe |
- 6 NVMe/SATA ports (NVMe from CPU 1)
- 6 NVMe/SATA ports (NVMe from CPU 2)
|
| LAN |
|
| USB |
- 2 USB 3.0 ports (rear)
- 1 USB 3.0 (front)
|
| Video |
|
| Serial Port |
|
| DOM |
- 2 SuperDOM (Disk on Module) ports
|
| |
|
| BIOS Type |
|
| |
|
| Software |
|
| Power Configurations |
|
| |
|
| CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
| FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
 | |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Color |
|
| | |
| | Buttons |
- Power On/Off button
- System UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- UID LED
|
| |
|
| PCI-Express |
- 1 PCI-E 3.0 x16 (FH, 10.5"L)
- 1 PCI-E 3.0 x8 (LP)
- 1 Internal PCI-E 3.0
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| | |
| | Hot-swap |
- 12 Hot-swap 2.5" NVMe/SATA drive bays
- Optional SAS support via SAS storage controller
|
| M.2 |
- 2 M.2 PCI-E 3.0 x4 M-Key NVMe via optional add-on card AOC-SLG3-2M2 (2260/2280/22110)
|
| | | |
| | Fans |
- 8 Heavy duty fans with optimal fan speed control
|
| Air Shroud |
|
| | |
| | 1200W Redundant Hot-swap Power Supplies with PMBus |
| Total Output Power |
- 800W: 100 – 127Vac
- 1200W: 200 – 240Vac
- 1200W: 200 -240Vdc (for CCC only)
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7.5 - 6A / 50-60Hz
- 200-240Vdc / 7.5 - 6A (for CCC only)
|
| +12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 100A / Min: 0A (200-240Vac)
- Max: 100A / Min: 0A (200-240Vdc)
|
| +12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  Titanium Level
[ Test Report ]
|
| | |
| | RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
