| Model |
| Brand | Supermicro |
| Product SKUs |
SuperServer 2027R-AR24
(Black) |
| Motherboard | Super X9DRH-7TF |
| Processor/Cache |
| CPU | Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP) |
| Note |
† BIOS version 3.0 or above is required |
| Cache |
Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| System Memory |
| Memory Capacity |
- 16x 240-pin DDR3 DIMM sockets
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| DIMM Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltagel |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| On Board Devices |
| Chipset |
|
| SAS |
- SAS2 via LSI 2208 (1GB cache)
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
|
| SCU SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 10
|
| AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Input / Output |
| AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
| SCU SATA |
- 4x SATA 2.0 ports (3Gbps)
|
| SAS |
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
7x USB 2.0 ports total
(4 rear + 2 via header + 1 Type A) |
| VGA |
|
| Serial Port / Header |
- 2x Fast UART 16550 serial COM port
(1 rear & 1 header)
|
| Chassis |
| Form Factor |
|
| Model |
CSE-216BA-R920LPB |
| Dimentions |
| Width | |
| Height | |
| Depth | |
| Gross Weight |
|
| Available Colors |
|
| Front Panel |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| Expansion Slots |
| PCI-Express |
- 1x PCI-E 3.0 x16 slot
- 4x PCI-E 3.0 x8 slots
|
| Drive Bays |
| Hot-swap |
- 24x Hot-swap 2.5" SAS2/SATA3 HDD Bays with direct attached backplane
|
| System Cooling |
| Fans |
- 3x 8cm 9.5K RPM, 4-pin PWM fans
|
| Power Supply |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
|
| Note |
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| Certification |
- Platinum Level (Cert. in progress)
|
| System BIOS |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| Operating Environment/Compliance |
| RoHS |
|
| Opetraing Temperature |
10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature |
-40°C to 70°C (-40°F to 158°F) |
| Operating relative Humidity |
8% to 90% (non-condensing) |
| Non-operating Humidity | 5% to 95% (non-condensing) |
