Supermicro SYS-2027PR-DC1R 2U Rackmount High Density-Server Barebone W

Supermicro SYS-2027PR-DC1R 2U Rackmount Server W/2 Nodes, DP LGA2011 Intel C606, 12 X 2.5IN Hot-Swap HDD Trays, 2 x GBLAN, IPMI Per Node, 1280W Redundant Power Supply, w/X9DRT-P and CSE-217HD+-R1K28B, Black

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI2_SUPE_20_1G

Manufacturer Part#:SYS-2027PR-DC1R

Price: $3406.95

Model
Brand	Supermicro
SYS-2027PR-DC1R	SuperServer 2027PR-DC1R (Black)
Motherboard	Super X9DRT-P
Processor/Cache
CPU	Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP *)
Note	† BIOS version 3.0 or above is required
Cache	up to 30MB
System Bus	QPI up to 8 GT/s
System Memory
Memory Capacity	16x 240-pin DDR3 DIMM sockets Supports up to 1TB DDR3 ECC LRDIMM Supports up to 512GB DDR3 ECC Registered memory (RDIMM)
Memory Type	1866//1600/1333 / 1066 / 800MHz Registered ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	32GB,16GB,8GB,4GB,2GB, 1GB
Memory Voltage	1.5 V and 1.35V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)
On-Board Devices (per Node)
Chipset	Intel® C606 Chipset
SAS	LSI 3108 SAS3 (12Gbps) controller; RAID 0, 1, 5, 6, 10, 50 support Note: In order to support the LSI RAID Controllers, both CPU socket must be populated
SATA	SATA3 (6Gbps) w/ RAID 0, 1, 10 SATA2 (3Gbps) w/ RAID 0, 1, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	Matrox G200eW
Input / Output (per Node)
SATA	2x SATA3 (6Gbps) ports 2x SATA2 (3Gbps) ports
SAS	8x SAS3 (12Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2 x USB 2.0 port total (2 x rear)
VGA	1x VGA Port
Serial Port/Header	1 1x Fast UART 16550 port / 1 Header
Chassis
Form Factor	2U Rackmount
Model	CSE-217HD+-R1K28B
Dimensions
Form Factor	17.25" x 3.47 " x 28.5" (H x W x D)
Gross Weight	85 lbs (38.6kg)
Available Colors	Black
Front Panel (per Node)
Buttons	Power On/Off button System Reset button UID button
LEDs	Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express	1x PCI-E 3.0 (x16) Low-profile slot 1x PCI-E 3.0 (x8) Low-profile slot
Drive Bays (per Node)
Hot-Swap	12x 2.5" Hot-swap SAS/SATA HDD trays
System Cooling
Fans	4x 8cm heavy duty PWM fans with optimal fan speed control
PSU
Power Supply	1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input	1000W Output @ 100-140V, 12-8A, 50-60Hz 1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output	1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A
Certification	Platinum Certified
System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family^†

2. Up to 1TB ECC LRDIMM, 512GB ECC
RDIMM, up to 1866MHz; 16x DIMM
sockets

3. 1x PCI-E 3.0 x16 Low-profile slot;
1x PCI-E 3.0 x8 Low-profile slot

4. Intel® i350-AM2 Dual port GbE LAN

5. Integrated IPMI 2.0 with KVM and
Dedicated LAN

6. 12x Hot-swap 2.5" SAS/SATA HDD
Bays

7. LSI 3108 SAS3 controller (8 ports)
+ 4 SATA3; RAID 0, 1, 5, 6, 10, 50

8. 1280W Redundant Power Supplies
Platinum Level (94%)