Supermicro SSG2027B-DE2R24L 2-Node Intel C602J Dual XEON LGA1356 2U Ra

Supermicro 2027B-DE2R24L 2-Node Intel C602J Dual XEON LGA1356 2U SuperStorage w/ X9DBS-F-2U, CSE-927ETS, 3x PCI-E X8, 2x JBOD SAS expansion, IPMI, 2x GBLAN, VGA: SSG-2027B-DE2R24L

Images shown for reference only

Supermicro 2027B-DE2R24L 2-Node Intel C602J Dual XEON LGA1356 2U SuperStorage w/ X9DBS-F-2U, CSE-927ETS, 3x PCI-E X8, 2x JBOD SAS expansion, IPMI, 2x GBLAN, VGA: SSG-2027B-DE2R24L SSG-2027B-DE2R24L

Shipping Extra

ATACOM Part #: SYI2_SUPE_20_29

Price: $4769.95

Model
Brand	Supermicro
SSG-2027B-DE2R24L	SuperStorage 2027B-DE2R24L (Black)
Motherboard	2x Super X9DBS-F-2U
Processor/Cache
CPU	Intel® Xeon® processor E5-2400 v2 (up to 95W TDP) Dual Socket B2 (LGA 1356)
Cache	Up to 20MB
QPI	QPI up to 8 GT/s
System Memory
Memory Capacity	6x 240-pin DIMM sockets Supports up to 192GB DDR3 ECC Registered memory Memory Mirroring supported
Memory Type	1866/1600/1333/1066/800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs NVDIMM support. (Not all vendor's NVDIMM are supported. Please contact your sales representative for details)
DIMM Sizes	1GB, 2GB, 4GB , 8GB , 16GB , 32GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
SAS2 Expander	Scalability through cascading 6Gb SAS2/SATA2 HDD support Inband SES-2 Enclosure Management
Chipset	Intel® C602J chipset
SAS/SATA*	LSI 2308 SAS2 (6Gbps)
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® i350 Dual-Port Gigabit Ethernet Controller Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization
Graphics	Matrox G200eW 16 MB DDR2
Super I/O	Winbond 83527HF chip
Others	PCI-E 3.0 x8 node to node/NTB connectivity PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA required
Input / Output
SAS	2x JBOD expansion port per node (mini-SAS HD)
LAN	2x RJ45 LAN ports
JBOD	-
USB	2x USB rear ports (via KVM cable) 1x USB on-board (TypeA)
VGA	1x VGA Port (via KVM cable)
Serial Port	1x console port (via KVM cable); Board to Board serial port connection available for management
System BIOS
BIOS Type	16MB SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) PCI 2.3 ACPI up to 5.0 USB Keyboard support
Chassis
Form Factor	2U Rackmount
Model	CSE-927ETS
Dimensions
Form Factor	3.5" x 17.2 " x 26.75" (H x W x D)
Gross Weight	85 lbs
Front Panel
Buttons	Power On/Off button System Reset button Alarm Mute Switch
LEDs	Power LED Hard Drive Activity LED 2x Network Activity LED System Overheat LED Power Fail LED
Expansion Slots
PCI-Express	3x PCI-E 3.0 x8 slots (on riser)
Drive Bays
Hot-swap	24x Hot-swap 2.5" Drive Bays shared between server nodes SAS or enterprise SATA HDD only recommended SATA drives require LSI interposer
Optional OS Drive	-
Backplane
Backplane	SAS2 dual Expander Backplane, features: • Scalability through cascading • 6Gb SAS2/SATA2 HDD support • Inband SES-2 Enclosure Management • Redundancy dual ported SAS architecture • Robust AirMax server node connections (SBB specification)
System Cooling
Fans	10x PWM Fans
Shroud	-
Power Supply
Power Supply	920W high-efficiency AC-DC Redundant power supplies with PMBus and I2C
AC Voltage	100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output	4 Amp @ +5V standby 75 Amp @ +12V With Power Distributor +5V: 45 Amp +3.3V: 24 Amp -12V: 0.6 Amp Certification Platinum Level Certified95%+ Platinum Certified [ Test Report ]
With Power Distributor	-

Chassis

Form Factor
2U Rackmount
Model
CSE-927ETS

Dimensions

Height
3.5" (88mm)
Width
17.2" (437mm)
Depth
26.75" (679mm)
Gross Weight
85 lbs (38.6 kg)
Available Colors
Black

Front Panel

Buttons
Power On/Off button
System Reset button
Alarm Mute Switch
LEDs
Power LED
Hard Drive Activity LED
2x Network Activity LED
System Overheat LED
Power Fail LED

Drive Bays

Hot-swap
24x Hot-swap 2.5" Drive Bays shared between server nodes
SAS or enterprise SATA HDD only recommended
SATA drives require LSI interposer

Backplane

SAS2 dual Expander Backplane, features:
• Scalability through cascading
• 6Gb SAS2/SATA2 HDD support
• Inband SES-2 Enclosure Management
• Redundancy dual ported SAS architecture
• Robust AirMax server node connections (SBB specification)

System Cooling

Fans
10x PWM Fans

Power Supply with Power Distributor

920W high-efficiency AC-DC Redundant power supplies with PMBus and I2C
AC Input
100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
4 Amp @ +5V standby
75 Amp @ +12V
With Power Distributor
+5V: 45 Amp
+3.3V: 24 Amp
-12V: 0.6 Amp
Certification Platinum Level Certified95%+ Platinum Certified
[ Test Report ]

PC Health Monitoring

CPU
Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Voltages.
5+1-switching voltage regulator
FAN
Total of 10 fan headers supporting up to 10 fans
Temperature Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual socket B2 (LGA 1356) supports
    Intel® Xeon® processor E5-2400 v2
2. Up to 192GB DDR3 1600MHz ECC reg.
    DIMM; 6x DIMM sockets (3 per CPU)
3. 3x PCI-E 3.0 slots per node (can be
    used for host or storage expansion)
4. I/O ports: 2 GbE LAN (1 for IPMI 2.0
    w/ Virtual Media/KVM over LAN),
    SAS 2.0 (6Gbps) x2 JBOD ports
5. Dedicated node to node connectivity
    featuring high performance PCI-E 3.0
    x8 and IPMI for robust node fail-over
    support
6. 24x Hot-swap 2.5" SAS2 HDD bays
    Internal 2x SAS/SATA ports for OS
    load on SLC SATA DOM
7. 920W Redundant Power Supplies
    Platinum Level Certifiednt
Thermal Control for 10x fan connectors
PECI

Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)