| Model |
| Brand | Supermicro |
| SYS-6027TR-D70FRF | SuperServer 6027TR-D70FRF (Black) |
| Motherboard | Super X9DRD-iF |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 (up to 135W TDP *)
Dual Socket R (LGA 2011)
* Please contact your Supermicro sales representative for additional details |
| Cache | Up to 20MB |
| System Bus | QPI up to 8 GT/s |
| System Memory |
| Memory Capacity | 8x 240-pin DDR3 DIMM sockets
Supports up to 256 GB DDR3 ECC Registered memory (RDIMM) |
| Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V / 1.35V |
| Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| SATA | SATA 2.0 & 3.0 with RAID 0, 1, 5, 10 |
| Chipset | Intel® C602 Chipset
Infiniband
Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller |
| SAS | LSI 2008 SAS (6Gbps)
RAID 0, 1, 10 support
(Optional: AOC-SAS2-RAID5-KEY) RAID 5 support
Note: In order to support the LSI RAID Controllers, both CPU socket must be populated |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Network Controllers | Network Controllers
Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200eW |
| Super I/O | - |
| Clock Generator | - |
| Input / Output |
| Serial ATA | 2x SATA 3.0 ports (6Gbps)
5x SATA 2.0 ports (3Gbps) |
| SAS | 8x SAS ports (6Gbps) |
| LAN | 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port |
| USB | 3x USB 2.0 ports total
(2x rear + 1x Type A) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI |
| Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-827HD-R1K28B |
| Dimensions |
| Form Factor | 3.47" x 17.25 " x 28.5" (H x W x D) |
| Gross Weight | 85 lbs (38.6kg) |
| Front Panel |
| Buttons | Power On/Off button
System Reset button |
| LEDs | Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED |
| Expansion Slots (per Node) |
| PCI-Express | 3x PCI-E 3.0 (x8) slots (1x Low-profile and 2x Full-height Full-length) |
| Drive Bays |
| Hot-Swap | 6x Hot-swap 3.5" SATA3/SAS2 HDD trays |
| Peripheral Drives |
| DVD-ROM | Slim DVD-ROM drive (optional) |
| System Cooling |
| Fans | 4x 8cm heavy duty PWM fans with optimal fan speed control |
| Backplane |
| | 1x 2U SAS/SATA backplane |
| Power Supply |
| Power Supply | 1280W Redundant High-efficiency Digital Power Supplies
w/ PMBus 1.2 |
| AC Input | 1000W Output @ 100-140V, 12-8A, 50-60Hz
1280W Output @ 180-240V, 8-6A, 50-60Hz |
| DC Output | 1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification
80 PLUS Platinum
[ Test Report ] |
