|
|
Supermicro SYS-8027R-7RFT+ 2U LGA2011 C602, 6x 3.5 Hot-Swap HDD, 10GBase-T, IPMI, 1400W Redundant PSU w/ X9QR7-TF+, CSE-828TQ-R1K43LPB SuperServer
|
|
Images shown for reference only
|
|
|
Supermicro SYS-8027R-7RFT+ 2U LGA2011 C602, 6x 3.5 Hot-Swap HDD, 10GBase-T, IPMI, 1400W Redundant PSU w/ X9QR7-TF+, CSE-828TQ-R1K43LPB SuperServer SYS-8027R-7RFT+ 2U LGA2011 C602, 6x 3.5 Hot-Swap HDD, 10GBase-T, IPMI, 1400W Redundant PSU w/ X9QR7-TF+, CSE-828TQ-R1K43LPB SuperServer
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: SYI2_SUPE_27_42
|
|
Price: $2935.95
|
|
|
|
|
 | Model | | Brand | Supermicro | | SYS-8027R-7RFT+ | SuperServer 8027R-7RFT+ (Black) | | Motherboard | Super X9QR7-TF+ | | Processor/Cache | | CPU | Intel® Xeon® processor E5-4600
Quad Socket R (LGA 2011) | | Cache | Up to 20MB | | QPI | QPI up to 8 GT/s | | System Memory | | Memory Capacity | 32x 240-pin DDR3 DIMM sockets
Supports up to 1TB DDR3 ECC Registered memory (RDIMM) in 32 DIMM sockets | | Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | | DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB | | Memory Voltage | 1.5 V, 1.35 V | | Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) | | On-Board Devices | | SATA | SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1 | | Chipset | Intel® C602 Chipset | | SAS | SAS2 (6Gbps) via LSI® 2208 controller
HW RAID 0, 1, 5, 6, 10 support | | IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC | | Network Controllers | Intel® X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201F PHY (dedicated IPMI) | | Graphics | Matrox G200eW (Nuvoton WPCM450 BMC) | | Super I/O | Nuvoton W83527HG | | Clock Generator | - | | Input / Output | | SATA/SAS | 2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps) 8x SAS2 ports (6Gbps) | | LAN | 2x RJ45 10GBase-T ports
1x dedicated LAN port for IPMI | | USB | 4x USB 2.0 rear ports | | VGA | 1x VGA Port | | Serial Port | 1 Fast UART 16550 serial port | | System BIOS | | BIOS Type | 16MB SPI Flash EEPROM with AMI® BIOS | | BIOS Features | Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support | | Chassis | | Form Factor | 2U Rackmount | | Model | CSE-828TQ-R1K43LPB | | Dimensions | | Form Factor | 3.47" x 17.25 " x 26.75" (H x W x D) | | Gross Weight | 85 lbs (38.6kg) | | Front Panel | | Buttons | Power On/Off button
System Reset button
UID button | | LEDs | Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED | | Expansion Slots | | PCI-Express | 4x PCI-E 3.0 x16 (2 in x8) Low-profile Slots | | Drive Bays | | DVD-ROM | 1x Slim DVD-ROM (Optional) | | Backplane | | Backplane | SAS/SATA HDD Backplane | | System Cooling | | Fans | 3x 8cm Hot-swap Cooling fans | | Shroud | 1x Air Shroud | | Power Supply | | Power Supply | Redundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 | | AC Voltage | 100-240 V, 50-60 Hz, 15 Amp max
+5V standby
6 Amp
+12V
100 Amp/115 Vac
117 Amp/230 Vac
Certification
80PLUS Platinum | | DC Output | - | | With Power Distributor | - | | | Key Features 1. Quad socket R (LGA 2011) supports
Intel® Xeon® processor E5-4600
family (8-Core), w/ QPI up to 8.0 GT/s
2. Up to 1TB* DDR3 1600MHz ECC
Registered DIMM; 32x DIMM sockets
* Depends on memory configuration
3. 4x PCI-E 3.0 x16 (2 in x8) LP Slots
4. Intel® X540 Dual port 10GBase-T
5. I/O ports: 2x 10Gb LAN, 1x Dedicated
LAN for IPMI Remote Management,
1x VGA, 1x COM port, 4x USB 2.0
6. 6x 3.5" Hot-swap SAS2/SATA3
Drive Bays
7. 3x 8cm Hot-swap Cooling Fans
8. 1400W Redundant Digital PS
80 PLUS, Platinum Level (95%) |
|
