Supermicro 6027AX-72RF-HFT3 2U Rackmount Server Barebone Dual XEON LGA

Supermicro 6027AX-72RF-HFT3 Dual XEON LGA2011 Intel C602 2U SuperServer w/ X9DAX-7F-HFT, CSE-829BTQ-R1K28LPB, 2x PCI-E X16, 2x PCI-E X8, IPMI, 2x GBLAN, 10x Hot-Swap 3.5 SAS, RAID, 1600W Redundant PSU, USB 3.0: SYS-6027AX-72RF-HFT3

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI2_SUPE_27_47

Price: $11096.95

Model
Brand	Supermicro
SYS-6027AX-72RF-HFT3	SuperServer 6027AX-72RF-HFT3 (Black)
Motherboard	Super X9DAX-7F-HFT
Processor/Cache
CPU	Dual Intel® Xeon® processor E5-2687W v2 (Ivy Bridge) (up to 150W TDP) Dual Socket R (LGA 2011) Note † BIOS version 3.0 or above is required
Cache	Up to 20MB
System Bus	QPI up to 8 GT/s
System Memory
Memory Capacity	8x 8GB DDR3 ECC 1866MHz RDIMM (Default) 16x 240-pin DDR3 DIMM sockets Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
Memory Type	-
DIMM Sizes	-
Memory Voltage	-
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)
On-Board Devices
SATA	SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1
Chipset	Intel® C602 Chipset
SAS	LSI 2008 SAS (6Gbps) RAID 0, 1, 10 support (Optional: AOC-SAS2-RAID5-KEY) RAID 5 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	Matrox G200eW
Audio	RealTek ALC889 7.1 High Definition Audio with S/PDIF header
Clock Generator	-
Input / Output
Serial ATA	2x SATA 3.0 ports (6Gbps) 8x SATA 2.0 ports (3Gbps)
SAS	8x SAS2 ports (6Gbps)
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	4x USB 3.0 (2 front, 2 rear) and 4x USB 2.0 ports
VGA Audio	1x VGA port Line-in / Line-out / Microphone Ports
Serial Port / Header	2x Fast UART 16550 ports
System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI
Chassis
Form Factor	2U Rackmount
Model	CSE-829BTQ-R1K28LPB
Dimensions
Form Factor	3.5" x 17.2 " x 25.5" (H x W x D)
Gross Weight	52 lbs (23.6kg)
Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED
Expansion Slots
PCI-Express	2 PCI-E 3.0 x16 slots 3 PCI-E 3.0 x8 slots 1 UIO PCI-E 3.0 x8 (for SMC UIO) or 1 PCI-E 2.0 x4 (in x8) slot
Drive Bays (per Node)
Hot-Swap	10x Hot-swap 3.5" SAS/SATA HDD trays
Backplane
Backplane	-
System Cooling
Fans	4x PWM fans w/ optimal fan speed control Heatsink 2x Passive CPU Heat Sink
Power Supply
Power Supply	1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input	1000W Output @ 100-140V, 12-8A, 50-60Hz 1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output	1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A

• Cooling Optimized Solution
• Supports Hyper-Speed
• Qualified low latency NICs here
• Low latency/jitter optimization guide here

1. Dual Intel® Xeon® processor
    E5-2687W v2 (Ivy Bridge)
2. Up to 512GB DDR3 1600MHz ECC
    Registered DIMM; 16x DIMM sockets
    Default: 8x 8GB 1866MHz DDR3 RDIMM
3. 2x PCI-E 3.0 x16, 3x PCI-E 3.0 x8,
    1x UIO PCI-E 3.0 x8 (for SMC UIO) or
    1x PCI-E 2.0 x4 (in x8)
4. I/O ports: 2 GbE LAN, 4 USB 3.0,
    2 HD/AC97, 1 IPMI dedicated LAN
    ports, and 2 IEEE 1394 Header
5. 8x Hot-swap 3.5" HDD Bays
    Support SAS2 HW RAID via LSI 2208;
    2x Hot-swap 3.5" SATA3 HDD Bays
6. 1280W Redundant Power Supplies
    Platinum Level (95%)