Supermicro SYS-2028TP-DECFR 2U Rackmount High Density-Server Barebone

Supermicro SYS-2028TP-DECFR 2U Rackmount High Density-Server Barebone (2 Nodes), C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2011) DDR4, 12 x 2.5in Bays, GBLAN, Infiniband, SAS, PCI-E, Per Node 1280W Redundant PSU, w/ X10DRT-PIBF & CSE-217HD+-R1K28B

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI2_SUPE_2D_10

Manufacturer Part#:SYS-2028TP-DECFR

Price: $4472.95

Product SKUs
Brand	Supermicro
Manufacturer Part Number	SYS-2028TP-DECFR
Motherboard
	Super X10DRT-PIBF
Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) QPI up to 9.6 GT/s
Note	† BIOS version 2.0 or above is required
Cache	Up to 22 Cores† / Up to 55MB† Cache
System Memory
Memory Capacity	16x 288-pin DDR4 DIMM slots Up to 2TB† ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type	2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB
Memory Voltage	1.2 V
On-Board Devices
Chipset	Intel® C612 Chipset
Infiniband	Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller
SAS	LSI 3008 SAS3 (12Gbps) via SAS3 Expander
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	ASPEED AST2400 BMC
Input / Output
SAS	12x SAS3 (12Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports total (2x rear)
Infiniband	1x external QSFP Infiniband connector
VGA	1x VGA Port
Serial Port / Header	1x Fast UART 16550 port / 1 Header (internal)
Others	1x mSATA (full size) and one SATADOM support on the daughter card 1x SATADOM support on the motherboard
Chassis
Form Factor	2U Rackmount
Model	CSE-217HD+-R1K28B
Dimensions
Width	17.25" (438mm)
Height	3.47" (88mm)
Depth	28.75" (730mm)
Weight	Gross Weight: 85 lbs (38.6kg) Net Weight: 66 lbs (29.9 kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button UID button
LEDs	Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED
Expansion Slots
PCI-E	1x PCI-E 3.0 x16 Low-profile slot 1x PCI-E 3.0 x8 slot 1x "0 Slot" card
Drive Bays
Hot-swap	12x 2.5" Hot-swap HDD Bays
System Cooling
Fans	4x 8cm heavy duty PWM fans with optimal fan speed control
Power Supply
	1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 AC Input 1000W Output @ 100-140V, 8-12A, 50-60Hz 1280W Output @ 180-240V, 6-8A, 50-60Hz DC Output 1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A Certification: Platinum Certified
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s 2. Up to 2TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 16x DIMM slots

3. 1x PCI-E 3.0 x16, 1x PCI-E 3.0 x8 slot, and 1x "0 Slot" card

4. Intel® i350 Dual port GbE LAN

5. Single port IB (FDR, 56Gbps), w/ QSFP connector

6. Integrated IPMI 2.0 with KVM and Dedicated LAN

7. 12x 2.5" Hot-swap drive bays (support up to 12x SAS3 in IT mode)

8. SAS3 via LSI 3008 controller and Expander

9. 1280W Redundant Power Supplies Platinum Level Digital (94%)