Supermicro SYS-2028TP-DECTR 2U Rackmount High Density-Server Barebone

Supermicro SYS-2028TP-DECTR 2U Rackmount High Density-Server Barebone (2 Nodes), C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2011) DDR4, 12 x 2.5in Bays, 2 x 10GBLAN, SATA/SAS, PCI-E, Per Node 1280W Redundant PSU, w/ X10DRT-PT & CSE-217HD+-R1K28B

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI2_SUPE_2D_12

Manufacturer Part#:SYS-2028TP-DECTR

Price: $3383.95

Product SKUs
Brand	Supermicro
Manufacturer Part Number	SYS-2028TP-DECTR
Motherboard
	Super X10DRT-PT
Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) QPI up to 9.6 GT/s
Note	† BIOS version 2.0 or above is required
Cache	Up to 22 Cores† / Up to 55MB† Cache
System Memory
Memory Capacity	16x 288-pin DDR4 DIMM slots Up to 2TB† ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type	2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB
Memory Voltage	1.2 V
On-Board Devices
Chipset	Intel® C612 Chipset
SAS	LSI 3008 SAS3 (12Gbps) via SAS3 Expander
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® X540 Dual port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	ASPEED AST2400 BMC
Input / Output
SAS	12x SAS3 (12Gbps) ports
LAN	2x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports total (2x rear)
VGA	1x VGA Port
Serial Port / Header	1x Fast UART 16550 port / 1 Header (internal)
Others	1x mSATA (full size) and one SATADOM support on the daughter card 1x SATADOM support on the motherboard
Chassis
Form Factor	2U Rackmount
Model	CSE-217HD+-R1K28B
Dimensions
Width	17.25" (438mm)
Height	3.47" (88mm)
Depth	28.75" (730mm)
Weight	Gross Weight: 85 lbs (38.6kg) Net Weight: 66 lbs (29.9 kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button UID button
LEDs	Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED
Expansion Slots
PCI-E	1x PCI-E 3.0 x16 Low-profile slot 1x PCI-E 3.0 x8 slot 1x "0 Slot" card
Drive Bays
Hot-swap	12x 2.5" Hot-swap HDD Bays
System Cooling
Fans	4x 8cm heavy duty PWM fans with optimal fan speed control
Power Supply
	1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 AC Input 1000W Output @ 100-140V, 8-12A, 50-60Hz 1280W Output @ 180-240V, 6-8A, 50-60Hz DC Output 1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A Certification: Platinum Certified
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s

2. Up to 2TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 16x DIMM slots

3. 1x PCI-E 3.0 x16, 1x PCI-E 3.0 x8 slot, and 1x "0 Slot" card

4. Intel® X540 Dual port 10GBase-T LAN

5. Integrated IPMI 2.0 with KVM and Dedicated LAN

6. 12x 2.5" Hot-swap drive bays (support up to 12x SAS3 in IT mode)

7. SAS3 via LSI 3008 controller and Expander

8. 1280W Redundant Power Supplies Platinum Level Digital (94%)