Supermicro SYS-2028TP-DNCTR 2U Rackmount High Density-Server Barebone(

Supermicro SYS-2028TP-DNCTR 2U Rackmount High Density-Server Barebone(2 Nodes), C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2011) DDR4, 12 x 2.5in Drive Bays, 2 x 10GBLAN, IPMI, SAS3, PCI-E Per Node 1600W Redundant Power Supply, w/ X10DRT-PT

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI2_SUPE_2D_2C

Manufacturer Part#:SYS-2028TP-DNCTR

Price: $3460.95

Product SKUs
SYS-2028TP-DNCTR	SuperServer 2028TP-DNCTR (Black)
Motherboard
	Super X10DRT-PT
Processor / Cache (per Node)
CPU	Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP )** Dual Socket R3 (LGA 2011)
Cores / Cache	Up to 18 Cores / Up to 45MB Cache
System Bus	QPI up to 9.6 GT/s
System Memory (per Node)
Memory Capacity	16x 288-pin DDR4 DIMM slots Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type	2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors
On-Board Devices
Chipset	Intel® C612 Express chipset
SAS	LSI 3008 SAS3 (12Gbps) controller; RAID 0, 1, 10 support Note: In order to support the LSI RAID Controllers, both CPU socket must be populated
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® X540 Dual port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	ASPEED AST2400 BMC
Input / Output
SAS	8x SAS3 (12Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports total (2x rear)
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 port / 1 Header
Chassis
Form Factor	2U Rackmount
Model	CSE-217HD+-R1K68B
Dimensions and Weight
Width	17.25" (438mm)
Height	3.47" (88mm)
Depth	28.5" (724mm)
Gross Weight	85 lbs (38.6kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button System Reset button UID button
LEDs	Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express	1x PCI-E 3.0 x16 slot 1x PCI-E 3.0 x8 slot
Drive Bays (per Node)
Hot-swap	8x 2.5" Hot-swap SAS HDD Bays 4x 2.5" Hot-swap Bays support NVMe
System Cooling
Fan	4x 8cm heavy duty PWM fans with optimal fan speed control
Power Supply
	1600W Single Output Titanium Level High-efficiency Redundant Power Supplies
AC Input	800W Output @ 100-140V, 7-10A, 50-60Hz 1600W Output @ 180-240V, 8-11A, 50-60Hz
DC Output	800W: +12V/67A, +5Vsb/1A 1600W: +12V/133A, +5Vsb/1A
Certification	80 Plus Titanium Level
System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s

2. Up to 1TB ECC LRDIMM, 512GB ECC
RDIMM, up to 2133MHz; 16x DIMM
sockets

3. 1x PCI-E 3.0 x16, 1x PCI-E 3.0 x8 slots

4. Intel® X540 Dual port 10GBase-T LAN

5. Integrated IPMI 2.0 with KVM and
Dedicated LAN

6. 4x NVMe and 8x 2.5" Hot-swap SAS
drives

7. LSI 3008 SAS3 controller (8 ports);
RAID 0, 1, 10

8. 1600W Redundant Power Supplies
Titanium Level (96%)