Supermicro SSG-6028R-E1CR12L C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2

Supermicro SSG-6028R-E1CR12L C612 Dual Xeon E5-2600 v3 Socket R3 (LGA2011) 2U Rackmount Storage-Server Barebone, DDR4, 12 x 3.5in Drive Bays, 2 x 10GBLAN, IPMI, SATA3/SAS3, PCI-E, USB, 920W Redundant Power Supply, w/X10DRH-iT

Images shown for reference only

Shipping Extra

ATACOM Part #: SYI2_SUPE_2D_6Z

Manufacturer Part#:SSG-6028R-E1CR12L

Price: $2439.95

Product SKUs
SSG-6028R-E1CR12L	SuperServer 6028R-E1CR12L (Black)
Motherboard
	Super X10DRi-T4+
Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP )** Dual Socket R3 (LGA 2011)
Cores / Cache	Up to 18 Cores / Up to 45MB Cache
System Bus	QPI up to 9.6 GT/s
System Memory
Memory Capacity	24x 288-pin DDR4 DIMM slots Up to 1.5TB ECC LRDIMM, 512GB ECC RDIMM
Memory Type	2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors
On-Board Devices
Chipset	Intel® C612 Express chipset
SAS	SAS3 (12Gbps) via LSI 3108 AOC; HW RAID
SATA	SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Quad 10GBase-T LAN with Intel® X540 Ethernet Controller Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	ASPEED AST2400 BMC
Input / Output
LAN	4x RJ45 10GBase-T LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports (rear) 1x Type A
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 port / 1 Header
Chassis
Form Factor	2U Rackmount
Model	CSE-826BE1C-R920LPB
Dimensions and Weight
Width	17.2" (437mm)
Height	3.5" (88mm)
Depth	25.6" (648mm)
Weight	Gross Weight: lbs ( kg) Net Weight: lbs ( kg)
Available Colors	Black
Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED
Expansion Slots
PCI-Express	2x PCI-E 3.0 x16 slot 3x PCI-E 3.0 x8 slots Slot 3 & 4 occupied by controller and JBOD Expansion Port
Drive Bays
Hot-swap	12x 3.5" Hot-swap SAS3/SATA3 drive bays
Backplane
	SAS3/SATA3 single expander per backplane
System Cooling
Fans	3x 8cm hot-swap redundant PWM cooling fans
Power Supply with Power Distributor
	920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input	100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output	4 Amp @ +5V standby 75 Amp @ +12V
Certification	80 PLUS Platinum Certified
System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI
Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family; QPI up to 9.6GT/s

2. Up to 1.5TB ECC DDR4 2133MHz;
24x DIMM sockets

3. 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8
(slot 3 & 4 occupied by controller
and JBOS expansion port)

4. Quad 10GBase-T LAN w/ Intel® X540

5. 12x 3.5" Hot-swap SAS3/SATA3 drive
bays

6. SAS3 via LSI 3108 AOC (HW RAID)

7. Server remote management: IPMI 2.0
/ KVM over LAN / Media over LAN

8. 3x 8cm hot-swap redundant
PWM cooling fans

9. 920W Redundant Power Supplies
Platinum Level (94%)