|
|
Supermicro SYS-6026TT-GTRF Twin Xeon 5600/5500 DDR3-1333, IPMI, 2x GBLAN, 6x3.5 Hot-Swap, 1400W, 2U
|
|
Images shown for reference only
|
|
|
Supermicro SYS-6026TT-GTRF Twin Xeon 5600/5500 DDR3-1333, IPMI, 2x GBLAN, 6x3.5 Hot-Swap, 1400W, 2U SYS-6026TT-GTRF Twin Xeon 5600/5500 DDR3-1333, IPMI, 2x GBLAN, 6x3.5 Hot-Swap, 1400W, 2U w/ X8DTT-HF+, CSE-827HD-R1400B, Rackmount Chassis Black
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: SYI2_SUPE_2U_90
|
|
Price: $1807.95
|
|
|
|
|
| Model | | Brand | Supermicro | | SYS-6026TT-GTRF |
- SuperServer 6026TT-GTRF (Black)
| | Motherboard | 2x Super X8DTT-HF+ |
| Processor/Cache | | CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 130W
- Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
| | QPI | up to 6.4 GT/a | | System Memory | | Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
| | Memory Type | - 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
| | Memory Voltage | 1.5 V | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | On-Board Devices | | Infiniband |
- |
| Chipset |
- Intel® 5500 (Tylersburg) chipset
- ICH10R
| | SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| | IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
| | Network Controllers |
- Dual Intel® 82574L Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | | | Super I/O | | | Input / Output | | Serial ATA | - Six Serial ATA ports
- 6 SATA hard drives supported
| | LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
| | VGA | | | Serial Port | - 1 Fast UART 16550 serial port
| | Chassis | | Form Factor | | | Model | | | Dimensions | | Form Factor | 3.5" x 17.2" x 28.5" (H x W x D) | | Front Panel | | Buttons | - Power On/Off Button
- UID Button
| | LEDs |
- Power LED (on power button)
- Network activity LED
- System Overheat/fan fail/power fail/ LED
- UID LED (on UID button)
| | Expansion Slots | | PCI-Express |
- 1 (x16) PCI-E 2.0 for Double-Width GPU
| | Drive Bays | | Hot-swap | - 6x 3.5" SATA Hot-swap drive bays
| | Backplane | | Hard drive Backplane | 2U Hard drive Backplane | | System Cooling | | Fans | | | PSU | | Power Supply | Redundant 1400W high-efficiency power supply with PMBus |
| Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following: 1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s
2. Up to 192GB** DDR3 1333/ 1066/
800MHz ECC Registered DIMM / 48GB
Unbuffered DIMM
3. 1 (x16) PCI-E 2.0 for Double-Width GPU
4. Integrated IPMI 2.0 with KVM and
Dedicated LAN 5. Dual Intel® 82574L Gigabit
Ethernet Controller
6. 6x Hot-swap SATA Drive Bays
7. 1400W Gold-level High-efficiency
Redundant Power Supply |
|
