|
|
Supermicro SYS-8026B-6RF Xeon 7500 DDR3, 2xGBLAN, 6xHot-Swap, IPMI, 1400W PSU, 2U
|
|
Images shown for reference only
|
|
|
Supermicro SYS-8026B-6RF Xeon 7500 DDR3, 2xGBLAN, 6xHot-Swap, IPMI, 1400W PSU, 2U SYS-8026B-6RF Xeon 7500 DDR3, 2xGBLAN, 6xHot-Swap, IPMI, 1400W PSU, 2U w/ X8QB6-F Black
|
|
|
|
| Shipping Extra
|
|
| ATACOM Part #: SYI2_SUPE_2U_91
|
|
Price: $4127.95
|
|
|
|
|
| Model | | Brand | Supermicro | | SYS-8026B-6RF |
- SuperServer 8026B-6RF (Black)
| | Motherboard | Super X8QB6-F |
| Processor/Cache | | CPU |
- Quad 1567-pin LGA Sockets
- Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below:
- Intel® Xeon® Processor 7500 Series (Nehalem-EX)
| | QPI | up to 6.4 GT/a | | System Memory | | Memory Capacity |
- 32x 240-pin DIMM sockets
- Supports up to 512 GB DDR3 ECC Registered memory at 1066/978/800MHz speed
- Memory Mirroring supported
| | Memory Type | - 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
| | Memory Voltage | 1.5 V, 1.35V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | On-Board Devices | | Chipset |
- Intel® 7500 (Boxboro-EX) chipset
- ICH10R
|
| SAS |
- LSI 6Gbps SAS 2108 controller
- RAID 0, 1, 5, 6, 10, 50 support
- BBU (battery backup) extension kit (optional)
| | SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
| | IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
| | Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | | | Super I/O | | | Input / Output | | LAN | | | USB |
- 2x USB rear ports
- 2x USB internal headers (3 ports)
- Total 5 USB 2.0 Compliant
| | VGA | | | Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | Chassis | | Form Factor | | | Model | | | Dimensions | | Form Factor | 3.5" x 17.2" x 27.9" (H x W x D) | | Front Panel | | Buttons | - Power On/Off Button
- System Reset button
| | LEDs | - • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED | | Expansion Slots | | PCI-Express |
- Auto-switch for 2 (x16) PCI-E 2.0 or 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or 4 (x8) PCI-E 2.0 slots
| | Drive Bays | | Hot-swap |
- 6x 3.5" Hot-swap SAS/SATA Drives Supported
|
| Peripheral Drives |
| DVD-ROM |
- Slim 8x DVD, 24x CD, DVD-ROM (optional)
|
| Backplane | | Hard drive Backplane | 1x 2U SAS / SATA backplane w/ SES-II | | System Cooling | | Fans | - 3x 80mm heavy-duty fans with optimal fan speed control; 1x Air shroud
| | PSU | | Power Supply | Redundant 1400W high-efficiency power supply with PMBus |
| 1. Quad Intel® Xeon® processor 7500
series, with QPI up to 6.4 GT/s
2. Support 512GB DDR3 ECC Reg. DIMM
3. Auto-switch for: 2 (x16) PCI-E 2.0 or
1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 or
4 (x8) PCI-E 2.0 slots (in low profile)
4. Intel® 82576 Dual-Port Gigabit
Ethernet Controller
5. 6 Total Hot-swap Drive Bays:
6x SAS/SATA Drives Support
6. 1400W Gold Level Redundant
High-efficiency Power Supplies
7. LSI 2108 8-Port 6Gbps SAS Controller
built-in; Hardware RAID 0, 1, 5, 6,
10, 50 support
8. Integrated IPMI 2.0 with Dedicated LAN |
|
