Model |
Brand | Supermicro |
SYS-6026T-3RF | SuperServer 6026T-3RF (Black) |
Motherboard |
Motherboard | Super X8DT3-F |
Processor/Cache |
CPU | Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: - Quad-Core Intel®
Xeon®Processor 5500 sequence (Nehalem-EP processor) NOTE: Support processors with Max TDP < 100W |
QPI | up to 6.4 GT/s |
System Memory |
Memory Capacity | 12x 240-pin DIMM sockets Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory Memory Mirroring supported |
Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
Memory Voltage | 1.5 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices |
Chipset | Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D |
- | SAS LSI SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support SATA Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC |
Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization 1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics | Matrox G200eW |
Super I/O | Winbond 83827HF chip |
System BIOS |
BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features | Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support |
Dimensions |
Dimensions (H x W x D) | 3.5" x 17.2" x 25.5 " |
Front Panel |
Buttons | Power On/Off button System Reset button |
LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power fail LED |
Drive Bays |
Hot-swap | 8x 3.5" SAS Hot-swap drive trays |
Input / Output |
SAS
SATA
| 8 SAS / SATA ports Six Serial ATA ports Six SATA hard drives supported |
LAN | 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | - 4x USB rear ports
- 2x USB on-board
- 4x USB internal headers
- Total 8 USB 2.0 Compliant
|
VGA | 1x VGA Port |
Serial Port / Header | 1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (optional) |
Power Supply |
PSU | 720W (1+1) Redundant high-efficiency power supply with PMBus |
AC Input | 100-240 V, 50-60 Hz, 4-9 Amp |
DC Output | 3 Amp @ +5V standby 59 Amp @ +12V |
+5V | 45 Amp |
-12V | 0.6 Amp |
+3.3V | 24 Amp |
- | - |