SUPERMICRO SYS-6026TT-HTRF 2U SERVER BAREBONE W/ 4x X8DTT-HiBXF
Images shown for reference only
SUPERMICRO SYS-6026TT-HTRF 2U SERVER BAREBONE W/ 4x X8DTT-HiBXF SUPPORT DUAL LGA-1366 INTEL XEON CPUS/ 48GB DDR3-1333 REG ECC MEMORY (12 DIMMS)/ 3 x 3.5IN SATA HOT-SWAP DRIVE BAY (EACH NODE)/ 1400W REDUNDANT PSU/ (CSE-827B-R1400B/ SC827B-R1400B)/ RAIL KIT MCP-290-00053-0N INCLUDED  
 
Shipping Extra  
ATACOM Part #: SYI2_SUPE_62_11  
   Price: $2561.95

 
Supermicro

SuperServer 6026TT-HTRF (Black)

4x Super X8DTT-HF

  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Quad-Core Intel®
      Xeon®Processor 5500 sequence (Nehalem-EP processor)
  • NOTE: Support processors with Max TDP < 100W
  • up to 6.4 GT/s
  • 12x 240-pin DIMM sockets
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory Mirroring supported
  • 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

    1GB, 2GB, 4GB

    1.5 V
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
  • Intel® 5500 (Tylersburg) chipset
  • ICH10R + IOH-36D
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI) 
  • 932S421 chip

    Matrox G200eW 8 MB DDR2
    Winbond W83527HG chip
  • Six Serial ATA ports
  • 3 SATA hard drives supported
  • -

    -

  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port 
  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
  • 1x VGA Port
  • 1 Fast UART 16550 serial port
  • 32Mb SPI Flash EEPROM with AMI® BIOS
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
  • 2U Rackmount
    CSE-827H-1400RB
    3.5" x17.2" x28.5 "
    85 lbs (38.6kg)
  • Power On/Off button
  • UID button
  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail/ LED
  • UID LED (on UID button)
  • -

  • 1 (x16) PCI-E ( Low Profile)
  • -

  • 3x 3.5" SATA Hot-swap drive bays
  • 2U Hard drive Backplane

    -

    -

    4x Cooling Fans

    -
    Redundant 1400W high-efficiency power supply with PMBus
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
  • 4 Amp
  • 100 Amp @ 100-140V
  • 116 Amp @ 180-240V
  • -
    -
    -
    Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
    1. Dual Intel® 5500 series Xeon® Quad/
        Dual-Core, with QPI up to 6.4 GT/s

    2. Up to 48GB DDR3 1333/ 1066/ 800MHz
        ECC Registered DIMM / 24GB
        Unbuffered DIMM

    3. 1 (x16) PCI-E ( Low Profile)
    4. Integrated IPMI 2.0 with KVM and
        Dedicated LAN
    5. Intel® 82576 Dual-Port Gigabit
        Ethernet Controller

    6. 3x Hot-swap SATA Drive Bays
    7. 1400W Gold-level High-efficiency
        Redundant Power Supply
     



    Graphic Fanless Compact Engine
    Jetway JBC361F35-T40E-B


    Jetway JBC371F35W-T40E-B
    Fanless Graphic Compact Engine


    4 HDMI Ports (Optional 10 HDMI Ports)
    Jetway NF83 AMD Motherboard


    Jetway HBJC128F83-B Digital Signage