| Model |
| Brand | Supermicro |
| SYS-6027R-3RF4+ | SuperServer 6027R-3RF4+ (Black) |
| Motherboard | Super X9DR3-LN4F+ |
| Processor/Cache |
| CPU | Intel® Xeon® processor E5-2600 (up to 115W TDP)
Dual Socket R (LGA 2011) |
| Cache | Up to 20MB |
| System Bus | QPI up to 8 GT/s |
| System Memory |
| Memory Capacity | 24x 240-pin DDR3 DIMM sockets
Supports up to 768 GB DDR3 ECC Registered memory (RDIMM) in 24 DIMM sockets
Supports up to 192 GB DDR3 ECC Un-Buffered memory (UDIMM) in 24 DIMM sockets |
| Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors
Detects double-bit errors (using ECC memory) |
| On-Board Devices |
| Chipset | Intel® C606 Chipset |
| Infiniband | - |
| SATA | Via Cable for SATA controller
SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond BMC |
| SAS | SAS from C606
RAID 0, 1, 10 support |
| Network Controllers | Intel® i350 Quad Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) |
| Super I/O | Nuvoton W83527 |
| Graphics | G200eW (Nuvoton WPCM450 BMC with graphic controller) |
| Input / Output |
| SAS | 8x SAS ports |
| Serial ATA | 2x SATA 3.0 ports (6Gbps)
4x SATA 2.0 ports (3Gbps) |
| LAN | 4x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port |
| USB | 9x USB 2.0 ports total
(4x rear + 4x via header + 1x Type A) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| Infiniband | - |
| Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-825TQ-R740LPB |
| Dimensions |
| Form Factor | 3.5" x 17.2 " x 25.5" (H x W x D) |
| Gross Weight | 69lbs |
| Front Panel |
| Buttons | Power On/Off button
System Reset button |
| LEDs | Power status LED
Hard drive activity LED
2x Network activity LEDs
System info. LED:
UID indicator, fan fail/System Overheat
Power fail LED |
| Expansion Slots |
| PCI-E | 4x PCI-E 3.0 x16 (low-profile, full-length)
1x PCI-E 3.0 x8 (low-profile, full-length)
1x PCI-E 3.0 x4 (in x8)
(low-profile, full-length) |
| Drive Bays |
| Hot-swap | 8x Hot-swap 3.5" SAS / SATA HDD trays |
| DVD-ROM | Slim DVD-ROM drive (optional) |
| System Cooling |
| Fans | 3x 8cm 7k RPM middle fans |
| Power Supply |
| PSU | 740W (1+1) Redundant high-efficiency power supply with PMBus |
| AC Input | 100-240 V, 50-60 Hz, 9-3.5 Amp |
| DC Output | 4 Amp @ +5V standby
61.7 Amp @ +12V |
| With Power Distributor | +5V: 30 Amp
+3.3V: 24 Amp
-12V: 0.6 Amp |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Featueres | Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI |
